Actually it is no contest because even with the upcoming new generation of motors they will not cut the mustard against the motion control de rigueur solution for mil spec. gimbal control.
The VCA comes in many different forms and you will find them inside of camera lenses and even Hard Drives. I took a couple of rotary magnets from a hard drive and using two output pins from a normal brushless gimbal controller I was able to make the prototype for a revolutionary inner axis system for a Phantom Vision. The Roll axis is not shown because that is the clever bit that will float the tilt axis (95Deg.) and the camera assy. on a magnetic field. The controller is set to Follow Mode so it returns to the models heading:tennis
:
The cat was not impressed but it kept him off the bench
The VCA comes in many different forms and you will find them inside of camera lenses and even Hard Drives. I took a couple of rotary magnets from a hard drive and using two output pins from a normal brushless gimbal controller I was able to make the prototype for a revolutionary inner axis system for a Phantom Vision. The Roll axis is not shown because that is the clever bit that will float the tilt axis (95Deg.) and the camera assy. on a magnetic field. The controller is set to Follow Mode so it returns to the models heading:tennis
:
Last edited by a moderator: