AV130 Pan Servo trouble problem.

[Gbillerty]

Hi guys!

I've made many searches all around but have not find any post that would help me. I'm sure someone already had the same problem as me.

I had some free time to install the AV130 Gimbal on my Hexa yesterday but I'm having a trouble with the pan servo.

Description:

When I connect the Pan Servo, is automatically start to rotate all the way. It seems to draw power immediately after I plug the battery and keep rotate.

Maybe it a TX setup trouble?? But even with the TX powered off, the pan servo still rotate. I'm new to TX for camera control so any help would be appreciated
I'm using a DX6i TX

thanks

 

[turkeybird]

You need to adjust the potentiometer on the pan servo. You should be able to rotate it.

 

[Gbillerty]

HI!

thanks for the reply! I had checked on the PAN Servo on the AV130 and there is no potentiometer on it... I am missing something?

 

[turkeybird]

HI!

thanks for the reply! I had checked on the PAN Servo on the AV130 and there is no potentiometer on it... I am missing something?

Have you tried adjusting your trims?