jackwrangham
Member
Our Skyjib X8 Medium list system is for sale. This has been uses on countless filming jobs in the UK and abroad, including ITV Tales from Northumberland, ITV Vera, Premiere League football ground shoots, Lagos - Nigeria and more.
We build nearly all our systems in-house and have done for many years with a great track record. It will fly anything up to 5D size camera.
This system is super reliable, well maintained and flies really well in high winds (30-40mph!). We have never has an issue with it.
It has undergone many upgrades and comes with the latest droidworx TI spec heavy lift central frame, folding booms and gimbal quick-release system.
It runs on the DJI WKM with upgraded A2 IMU (stable firmware) and a DJI iOSD for flight records. It has a Futaba FassTEST rx installed, along with temperature, vario (altitude) and voltage sensors.
It runs KDE 35A ESCs on the latest firmware (active braking), through a Gryphon Dynamics distro board, a Gryphon BEC also provides a load of 12v and 5v outs.. It has Plettenberg motors that have been serviced twice over the years with new bearings.
Power is from a pair of 5S lipos with EC5 connectors (comes with 6 pairs of GensAce 10ah 5s packs - they are still good for another 100+ cyles), spinning 14" tiger props (two spare sets included). It will fly a GH4 for around 12mins. A 5D for about 10.
We use DJI retracts, which use their own power supply from the main packs (not through rx) and fold up really well out of the way, we have also installed LEDs on the ends (see pics).
The BeSteady gimbal is awesome - really easy to balance and tune - it has been better than the Movi M5 for the most part, until the new Movi Akira firmware came out, otherwise we would be keeping it!
The system folds down and can be ready to fly from the case in about 15mins. The gimbal has its own case and 4 batteries that attach to the side and power it and a video tx for about 5 flights.
You'll need a radio tx (pref Futaba fasstest compatible), a tx and rx for gimbal control, a camera and a video downlink to be ready to fly.
Pics here - https://drive.google.com/open?id=0B5sMGhxjThKxbG1Sbk9yaXFzRVk
We're asking for 3800 ex vat.
In the UK, can deliver anywhere at the buyers cost (two peli cases). Or feel free to collect and we'll give you a full run-down on the system. Buyers with multi-rotor experience only please.
Here's the list:
Modified Skyjib TI X8HL frame
DJI Retracts with LEDs
DJI WKM with A2 IMU
DJI iOSD
Futaba R7008SB
Futaba Voltage, Temperate and Vario Telemetry modules
KDE 35A ESCs, latest firmware
Plettenberg 750kv motors, 2 spare motors (never needed!)
Tiger Motor 14" props, plus 2 spare pairs
Gens Ace 5S 10ah packs x 6 pairs, EC5 connectors
BeSteady One Pro v2 gimbal
4 Gimbal lipos
Peli Storm Cases for X8 and Gimbal
If you're in the market for a system that will offer more payload flexibility, power and wind tolerance than an Inspire Pro, but cant stretch for a Freefly Alta, this is for you.
We build nearly all our systems in-house and have done for many years with a great track record. It will fly anything up to 5D size camera.
This system is super reliable, well maintained and flies really well in high winds (30-40mph!). We have never has an issue with it.
It has undergone many upgrades and comes with the latest droidworx TI spec heavy lift central frame, folding booms and gimbal quick-release system.
It runs on the DJI WKM with upgraded A2 IMU (stable firmware) and a DJI iOSD for flight records. It has a Futaba FassTEST rx installed, along with temperature, vario (altitude) and voltage sensors.
It runs KDE 35A ESCs on the latest firmware (active braking), through a Gryphon Dynamics distro board, a Gryphon BEC also provides a load of 12v and 5v outs.. It has Plettenberg motors that have been serviced twice over the years with new bearings.
Power is from a pair of 5S lipos with EC5 connectors (comes with 6 pairs of GensAce 10ah 5s packs - they are still good for another 100+ cyles), spinning 14" tiger props (two spare sets included). It will fly a GH4 for around 12mins. A 5D for about 10.
We use DJI retracts, which use their own power supply from the main packs (not through rx) and fold up really well out of the way, we have also installed LEDs on the ends (see pics).
The BeSteady gimbal is awesome - really easy to balance and tune - it has been better than the Movi M5 for the most part, until the new Movi Akira firmware came out, otherwise we would be keeping it!
The system folds down and can be ready to fly from the case in about 15mins. The gimbal has its own case and 4 batteries that attach to the side and power it and a video tx for about 5 flights.
You'll need a radio tx (pref Futaba fasstest compatible), a tx and rx for gimbal control, a camera and a video downlink to be ready to fly.
Pics here - https://drive.google.com/open?id=0B5sMGhxjThKxbG1Sbk9yaXFzRVk
We're asking for 3800 ex vat.
In the UK, can deliver anywhere at the buyers cost (two peli cases). Or feel free to collect and we'll give you a full run-down on the system. Buyers with multi-rotor experience only please.
Here's the list:
Modified Skyjib TI X8HL frame
DJI Retracts with LEDs
DJI WKM with A2 IMU
DJI iOSD
Futaba R7008SB
Futaba Voltage, Temperate and Vario Telemetry modules
KDE 35A ESCs, latest firmware
Plettenberg 750kv motors, 2 spare motors (never needed!)
Tiger Motor 14" props, plus 2 spare pairs
Gens Ace 5S 10ah packs x 6 pairs, EC5 connectors
BeSteady One Pro v2 gimbal
4 Gimbal lipos
Peli Storm Cases for X8 and Gimbal
If you're in the market for a system that will offer more payload flexibility, power and wind tolerance than an Inspire Pro, but cant stretch for a Freefly Alta, this is for you.