DucktileMedia
Drone Enthusiast
I kept this as a back up helicopter over the last few years and have decided it's just collecting dust. The good news is that it has very low hours, I'm guessing well under 10. I just purchased a brand new Futaba 14sg, iCharger 306b and power supply as well as a back up 4 port charger plus power supply. These have 1 cycle on them to check for operation. Ready to shoot!
The y6 is roughly 900mm.
AV130 gimbal
remote IR trigger for Sony nex cameras.
Hoverfly Pro, no gps
Avroto 2814
Turnigy Plush 40Amp
(6) Zippy 5000 4s 30c lipos. Very low IR(1-3), tested and written on each pack.
Props are all balanced with about 20 extra balanced props. Tends to fly best with Slow Fly 11 or 12's depending on camera load.
(2) 7" monitors
extra carbon arms and clamps
Futaba 14Sg with voltage telemetry!
iCharger 306b with progressive RC 500W PS
Thunder T6 multi charger with 300W PS.
Many extra parts.
Flies perfectly smooth and stable.
The y6 is roughly 900mm.
AV130 gimbal
remote IR trigger for Sony nex cameras.
Hoverfly Pro, no gps
Avroto 2814
Turnigy Plush 40Amp
(6) Zippy 5000 4s 30c lipos. Very low IR(1-3), tested and written on each pack.
Props are all balanced with about 20 extra balanced props. Tends to fly best with Slow Fly 11 or 12's depending on camera load.
(2) 7" monitors
extra carbon arms and clamps
Futaba 14Sg with voltage telemetry!
iCharger 306b with progressive RC 500W PS
Thunder T6 multi charger with 300W PS.
Many extra parts.
Flies perfectly smooth and stable.
Attachments
Last edited by a moderator: