8th time is the charm? Right?

[sparky2697]

Quadcopter Beta 8.0
Do you guys think this would fly/work?
Any compatibility issues?



Quadcopter:

Frame:
OCDAY-250 Pro 250 Wheelbase Bat Warrior Quadcopter Carbon Fiber Frame VZER0450
$29.99
http://www.aliexpress.com/item/OCDA...-Carbon-Fiber-Frame-VZER0450/32579298648.html

Power Distribution Board:
ARRIS® CC3D Naze32 Flight Controller Mini Power Distribution Board w/LED (Comes with BEC 5V-12V output) for 250 Multicopter
$11.98
http://amzn.com/B00UFK8VJ2

Flight Controller:
EMAX Skyline32 Flight Controller (Advanced V1.1)
$26.99
http://www.emaxmodel.com/emax-skyli...ced-1719.html#product_tabs_description_tabbed

ESC:
Afro Race Spec Mini 20Amp Multi-Rotor Speed Controller with BEC
4 x $9.85 = $40
http://www.hobbyking.com/hobbyking/..._Motor_Speed_Controller_SimonK_Firmware_.html

Motors:
EMAX MT2204 2300KV Multirotor Motor
4 x $14.60 = $58.40
https://www.emaxmodel.com/emax-multicopter-motor-mt2204-kv2300.html

Props:
DAL 5040
$19.99
http://amzn.com/B0101959CS

Batteries:
2 Packs Floureon 3S 25C 11.1V 2200mAh Li-Polymer Lipo RC Battery Pack with XT60 Plug Connector for RC Helicopter RC Airplane RC Hobby
$35.99
http://amzn.com/B00LZKHNG8

Controller and Receiver:
FlySky FS-T6 2.4ghz Digital Proportional 6 Channel Transmitter and Receiver Model
$53.32
http://amzn.com/B012W6HJHG

Cost for Quadcopter: $279





FPV Set:

FPV Headset:
Quanum DIY FPV Goggle V2 w/5 inch LCD Monitor
$55.79
http://www.hobbyking.com/hobbyking/..._FPV_Goggle_V2_w_5_inch_LCD_Monitor_Kit_.html

FPV 5.8 Receiver:
Boscam FPV 5.8G 8CH 200mW AV Wireless Receiver RC805
$21.99
http://amzn.com/B00ITHBNWA

FPV Camera and Transmitter:
Eachine 700TVL 1/3 Cmos FPV System 148 Degree Camera Module With 32CH Transmission
$39.99
http://amzn.com/B00WJFKXS8

5.8 Antenna:
Anbee® FPV 5.8Ghz Circular Polarized Clover Leaf Antenna High Gain Aerial Set w/RP-SMA Plug
$9.98
http://amzn.com/B00LGMTTPI

Recording:
RUNCAM HD-S 5V
$54.99
http://amzn.com/B00VT065GI

Cost for FPV Set: $184




Tools:

Battery Charger:
Tenergy B450AC 45W AC/DC Compact Balance Charger for NiMH NiCd LiPo Li-ion LiFePO4 Lead Acid Battery Packs
$29.99
http://amzn.com/B0170VT6Q0

Heat Shrink Wire Wrap:
Anytime Tools 127 pc Heat Shrink Wire Wrap Cable Sleeve Tubing Sets Assorted Size w/Case
$8.95
http://amzn.com/B008WWC6FU

Bullet Connectors:
T-Trees 10 Pairs Of Xt60 Xt-60 Male Female Bullet Connectors Plugs For Rc Lipo Battery
$10.95
http://amzn.com/B00XC4NX1E

Prop Balancer:
ZJchao Precision Prop Balancer for Quadcopter and Airplane Props
$7.88
http://amzn.com/B00CLX8JRA

Solder Kit:
Elenco TK14 Electronics Technician Starter Kit, 9-Piece
$19.95
http://amzn.com/B0002IWF62

Elenco Soldering Iron Holder
$5.52
http://amzn.com/B0002LLWEU

SE MZ101B Helping Hand with Magnifying Glass
$6.98
http://amzn.com/B000RB38X8

Cost for Tools: $92





TOTAL COST: $555

 

[Hoki]

DID YOU STEAL MY FRAME AND FLIGHT CONTROLLER IDEA! I THINK YOU DID SO ADMIT IT!

 

[Hoki]

I have the advanced skyline32 but turns out I really didn't need it cause the mini and the acro have the ability to do headless mode and that's all I wanted but it's nice to do alt hold. I just ordered the ocday 250 pro a few days ago! I'm sooo excited.

I don't think you need to power board cause the bat warrior frame has a built in power distribution.

Just get 12amp escs! 20 is way to much plus I think more expensive. I'd get the cheap 4 pack of 12amp ones on aliexpress for 11 dollars but the best ones are the kingkong blheli ones with the lil tabs you can solder right onto.

 

[sparky2697]

DID YOU STEAL MY FRAME AND FLIGHT CONTROLLER IDEA! I THINK YOU DID SO ADMIT IT!

I did take the frame idea, it is much nicer looking. But I kept the PDB because it didn't seem like there was a spot for FPV camera on the built in board. The flight controller has always been that way.

I have the advanced skyline32 but turns out I really didn't need it cause the mini and the acro have the ability to do headless mode and that's all I wanted but it's nice to do alt hold. I just ordered the ocday 250 pro a few days ago! I'm sooo excited.

I don't think you need to power board cause the bat warrior frame has a built in power distribution.

Just get 12amp escs! 20 is way to much plus I think more expensive. I'd get the cheap 4 pack of 12amp ones on aliexpress for 11 dollars but the best ones are the kingkong blheli ones with the lil tabs you can solder right onto.

The motors recommend 12-18 amp ESC and I would rather have over kill for the 10+ dollars. The alienexpress site seems a little sketchy to me.

Thank you for all the advice by the way, your very quick to respond.

 

[Hoki]

I've ordered everything more than 20 orders on aliexpress, it just takes a month sometimes for some things to arrive but everything as been great.