Hey guys...I need some advice;
I'm nearing the end of my Tarot 680 Pro build.
Orange r910
Naza M lite w/GPS
Platinum 30a Opto ESCs
620 KV motors
DX8
At slightly above idle throttle, only odd number motors spin (1,3,5). When the throttle is increased, above 50% the even motors kick in one by one.
ANY IDEAS? Is this an ESC calibration issue?
I'm nearing the end of my Tarot 680 Pro build.
Orange r910
Naza M lite w/GPS
Platinum 30a Opto ESCs
620 KV motors
DX8
At slightly above idle throttle, only odd number motors spin (1,3,5). When the throttle is increased, above 50% the even motors kick in one by one.
ANY IDEAS? Is this an ESC calibration issue?