2 camera downlink

B

benbigdude

Member
Anyone running a 2 camera wireless setup? We currently have a single 5.8ghz link, but need to see a second camera. Any info would be great.
 

C

chrisp30

New Member
The DJI OSD will take 2 video camera feeds. Feeds are switched through your TX. Works great only need one downlink.
 



B

benbigdude

Member
I think I have just answered my own question.....we run a duel setup on different channels. Are there any issues with running both on 5.8 ghz?
 

C

chrisp30

New Member
That is what I would do. I have the DJI system and have been very pleased...I am thinking of adding a separate camera controller for high end work. I am going to get a second 5.8 receiver and share the feed with the camera operator. I think for 80% of the work that would be fine. However if you lose line of sight it could make the job difficult if the gimbal is 3 axis. If its 2 axis no problem since the gimbal is locked to a forward position only.
 

P

peterd

Member
Hi bendigdude,

It works without problems.......
My Droidworx 2 Douwlink 5, GHz
One of the main camera on Gimbale (Sony CX730) and the other fixed on candid camera arm droid, also 5.8 GHz ... of course each on a different channel...

Peter
 


You must log in or register to reply here.
Top