2.4 Datalink Connection break problem after takeoff

marmaris

New Member
Hi,
first i tell about my system,
A2 controller,
2,4 Datalink,
Futaba T12sg remote
5.8 fpv
hitec aurora 9 2.4 for gimbal controller,

i m using Pc GS , everythink ok , i upload mission and click go, s900 take off and go for mission , but about 20 mt connection break, when connection break i hear windows usb unplug warning voice ( same i unplugged usb cable from pc ) and connection gone, nothing can do on pc GS, then i bring s900 nearly by remoting myself, click connect and its connecting, i m usin windows 8.1 , and i plug data module with usd original usb cable of datalink module, i not power it extra with battery,, any suggestion guys? thanks
 

ChrisErl

Member
Power it with an external battery. My guess is that your USB port is 1 of the low power ones and doesn't supply enough power to datalink. I always plug mine into a 2200mah 3s battery
 

marmaris

New Member
i did test today with 3s battery but same problem, today it is doing mission but i cant follow on my pc GS, it is disconnecting, i decide to send back datalink to dealer, thanks for help
 

Top