Search results

Did a similar 7 minutes flight with new Tiger 2826-6 motors and the warmest ended up at 47 C degrees immediately after flight.:nevreness: Another side effect was also that it felt more responsive and stable in gusty, wind which it was today during the test.

You are so right! After 7 minutes calm flight the outrunner is 88 C degrees!!! Will stay on ground until I get my 2826-6 :-(

Thank you Vojec for your very valuable feedback! Is yours a hexa (not octo) as well? So you think a Xoar 13x6.5 will put less stress on the motors than APC 14x4.7?

Thank you bensid54 for your input! I'm a bit puzzled. My accs 12000 mAh 4S, which gives me an absolute max flight time of 10 minutes (calculated of course). This gives an average of 80A, which in turn a power consumption of 80 x 15 / 6 = 200W per motor. The QC-3328 is rated for "Mechanical...

Hi! I need some advice if I should go for a motor upgrade on my CineStar 6 or not. I'm having a reasonably good working CS6 with FFS-3328 motors (700 kV), which I think is equivalent with Tiger 2814-11. The AUW is 7 kg so it puts ~1.2kg on each motor. It hoovers around 55% throttle with...

Hi edykosta! Coming in late in the thread, but found it googling around desperately for hints to solve my problems. I'm having a very similar setup as you, CS6, WKM, 700kV motors and APC 14x4.7. It is getting quite nervous in the slightest wind and often to the extent that my brushless gimbal...

Hi gtranquilla! I agree to your comments, but I think yawn control when using course lock mode with Wookong M gives me the same freedom of video angles as with yawn on a 3-axis gimbal. I also fly with a second operator for camera when the situation requires it, but without any extra weight and...

Hi! Like already mentioned in the thread, taking pictures is not really an issue. However, video is a completely different story. Ideally two operators and a three axis gimbal is what most people use. However, a setup with two operators has its limitation as well, since it requires lots of...

Hi Dave! i have all necessary permits and ensurance and I'm available for helping you with aerial photo/film at that time. Björn

Hi Dave! For professional aerial photo and filming in Sweden you need a license from the Swedish "Transportstyrelsen"(ours is UAS 1B-623). This is a license that has to be renewed every year. You must also have a special insurance from Interhannover covering damages and injuries for third...

Hi all! I've just converted a 2-axis Cinestar gimbal to BL with components from brushlessgimbals.com. It seems to work all pretty well but one function seems to be "broken". The RC INPUT for roll axis does not work for me. It is kind of dead. The RC INPUT for pitch works just fine and also...

..I do have some footage, but taken with F550 and Panasonic HC-X900 from the "pre-brushless era" http://youtu.be/hE1sO27LUTg There is more on my web site at http://www.vyfabriken.se/start/exempel/ Cheers!

Hi! Unfortunately I don't have any footage yet. However, comparing the camera as such with other high-end cameras is well made here http://youtu.be/FhgepzjTnZY. Check out the whole clip. It is well made in my opinion. I do have the possibility help you 1st of march anywhere in Sweden. Maybe we...

Hi all! I've just converted a 2-axis Cinestar gimbal to BL with components from brushlessgimbals.com. It seems to work all pretty well but one function seems to be "broken". The RC INPUT for roll axis does not work for me. It is kind of dead. The RC INPUT for pitch works just fine and also the...

Hi Dave! Depends on how heavy. I have a CS6 with 500mm booms and a reasonably sized BL gimbal. I personally fly with Lumix GH3 since I find it delivering footage quality as good as with heavier professional cameras. I live in Stockholm and runs a small business http://www.vyfabriken.se (site...

Good choice in my opinion. My latest MR is a Cinestar 6 with 2-axis gimbal. I don't want 3-axis gimbals for reasons explained in the topmost item in my tech blog http://techblog.vyfabriken.se/. I'm in the process of converting my Cinestar gimbal to brushless, also mentioned on my blog. A CS6 can...

Hi all! My name is Björn Smith and I live in Stockholm Sweden. I've been experimenting and building UAVs for aerial photo and film for a few years now and this has resulted in a commercial business Vyfabriken AB. It has also rendered lots of technical findings and experience that I recently...