Search results

I have a brand new KK2.0 for sale. I would like to get $45.00 CONUS. I will cover shipping and PP fees. I can also Flash it with either v. 1.5 or 1.6 firmware upon request. It includes Piezo as well. Please PM me with any questions or interest. Thanks

4 Turnigy Plush 25 amp Escs SOLD SOLD SOLD I have 4 Turnigy Plush esc's for sale. 25A w/ 3A-5V BEC. These were hardly used and are in like new condition. Bullet connectors on motor side and the 2 power leads have solder from being attached to PCB. I am only selling because I don't have...

Partial +1 to this answer. I say partial because regardless of if you can get all the answers on a forum you should still learn how use and research for yourself. That said, this is the 2nd time in my new membership to this forum that someone replies in a snide way. The first time was more like...

Hey guys, I haven't had time to fly my DJI 550 clone much even with 1.5 firmware. But I haven't had this happen to me until now. Flying in my culdesac and I had it about 30ft up hovering and all of a sudden the front dropped like it was going to dive bomb but I regained control after it...

Now when I try to arm it giving R rudder w/no throttle I get nothing. No led either. If I give it left rudder it beeps w/no led. If I reverse the rudder on my DX8 I get same results, just reversed. I can't seem to find an answer on the internet, but I've found people w/ similar problem.

I found the correct firmware, but I am still having a no throttle problem that I forgot to mention. Give it full stick and nothing. I tested escs individually just connecting to the rx and motor and they spool up fine. What am I missing?

Hey guys, I just installed my KK2.0 onto my DJI550 clone and the first problem I had was a no throttle signal error even with giving throttle. So I went ahead and installed the latest 1.5 firmware. No when I turn the unit on it says OpenAero not safemode. There is no video or instructions for...

Very pretty, I was considering doing a wood build myself. Maybe even a material called Richlite, it's a recycled paper product layered like phenolic.Super strong. I am guessing you are using 1/2" thick 9 ply plywood? I will have to cheat and cut it on my CNC at work! That will ensure a perfectly...

Thanks Jim. I had no idea about these forums, I had been searching the conventional way and had never found this. I will be joining there as well.

But with a larger prop = more resistance so wouldn't the 4s = more voltage be a better fit for 10" props? I know C is discharge rate but I was hoping for a better explanation.

Building a DJI550 clone 10" props, with kk2.0. DJI 2212 motors and HKF30 30amp esc w/simonk firmware. My question is... I'm am def. using a 3s lipo in the 4000-5000mah range for more time in the air, but what C rating. Will 20c suffice? What will be the cons of not using a higher C rating? Also...

**sold**

I have a Brand New only mounted but never flown Ikon flybarless unit. I had it mounted on my Protos which by the way is for sale as a bnf for $600, but it never made it past the setting up stage. The Ikon will come with box, servo ext. wires and USB cable for computer. Everything is in GREAT...

Wow, that's really nice. Incredibly stable. All I need are my servo ext. wires and the lipo to come in and I'm all set to complete my build!! I do go down that way a few times a year so I will def. have to stop in. Thank You

Ha! +1 about the old timers! Been to RC buyers many times. Wanna talk about old timers??? I'm 44 and they talk to me like I'm 12yo. Twice I've gone there for lipos w/ questions and left with nothing because twice that same person made me feel like I was a child. I just wanted Hobbytown to just...

Forgot to mention, check the shaft and motor housing as well. The shaft could have a split or the housing could be cracked causing the main gear to pull away from the pinion just enough to make the gears slip.:encouragement:

Def. sounds like a motor or nylon gear issue. Everything spins freely when you spin the props by hand, no slight slip or catching? Examine the teeth on the nylon gears, all it takes is a warn tooth or 2 to do that, they are so small you may not even see the wear. It's a good idea to have spare...

Wow, you've got some nice pics there. That's the direction I'm heading in. Gonna get my feet wet with this DJI clone, then move up to something more solid/stable and start doing aerial photography and video. Who knows maybe it may become something. Can't wait to head up to the mountains to try...

Thanks, I'm hoping so too. This is my first multi build so I am hoping to be able to tap the knowledge of the more experienced members here, and avoid some of that learning curve and $$$ doing it on my own. I'm also a member on Helifreak and everyone there has proven to be a great group of guys...

Thanks hollywood. I def. will. I live in Manchester. Once I get more comfortable with this one I'm gonna do something higher end with FPV too.