Search results

  1. C

    S800 Evo For Sale

    Looking to shift my S800 Evo. Its done about 6 months work and then was left as a back up machine. Its a good as new and never been crashed. Whats included: S800 Evo fully built and ready to fly Z15 Zenmuse GH3 Gimbal Panasonic GH3 Body Wookong FC Multiplex Royal Pro 9 Radio (some pixels out...
  2. C

    Help with S900 Vibration/ Shaking

    Hi, I'm looking for help to solve my DJI S900 from shaking/ vibrating. History - running with a Z15 GH4 on it for 18months with no problems. I've taken that off and put on a 3rd party gimbal using an adapter on the rails. All up weight is 7.8kg. Problem is that the frame shakes about and when...
  3. C

    S900 Shaking (WKM)

    After some help please... Just fitted a new gimbal to my S900 and its shaking in flight and when the gear is raised it seems to get worse. Previously had a Z15 on it and is smooth as silk. I adjusted the IMU and GPS Z axis which helped a little but not enough. The COG is now lower and i was...
  4. C

    S900 Vibrating and jumping

    Hi, I've just fitted a brushless gimbal to my S900 and when in flight the whole aircraft vibrates and jumps up and down and when you raise the gear it gets worse. The gimbal is mounted using a plate which is mounted in the same way a Zenmuse is. The gimbal does sit lower than a zenmuse too...
  5. C

    Ground station not connection to iPad ???

    I have the ground station for the iPad and it will not connect to my A2 flight controller. Ive tried all i can think of including updating the air and ground side. When you open the iPad app it can't see a flight controller. The odd thing is if i plug it into my WKM it sees it straight away...
  6. C

    IOSD Power Out ?

    Can someone confirm for me what power is given out from the iOSD is using a 6 cell battery? I have a video transmitter which will only take up to 17v and don't want to blow it up! Hoping its 12v Thanks
  7. C

    Futaba T8J and A2 ???

    Can anyone tell me if the Futaba T8J is compatible with the A2 with regard to S-BUS? I'm trying to bind by not having much luck! Cheers
  8. C

    S900 and XT60 Connectors on Batteries?

    Is there any reason not to use XT60 connectors on the S900 (using an adapter for the XT/AS150) I've recently purchased 12 sets of 10400mah batts which are for my S800 Evo and i'd like to keep things interchangeable. The motors are the same so i don't see why the S900 would be pulling any...
  9. C

    Airport Radar Interference?

    Hi, Does anyone know if airport radar will cause interference with a flight controller - more specifically GPS mode on a Wookong? I'm talking about real close range airside stuff so within 100-200m of it. Cheers
  10. C

    3X Pro V3 Gimbal - NEW

    Hi, For sale is my Photoship One 3X Pro V3 gimbal. I purchased in error so its NEVER been used. It comes with the upgraded tilt tray and the FMTS for the Guai X7. As i say its never been used so it's basically new. £900 + Shipping
  11. C

    Zenmuse GH3 Video Issue

    Hi, I'm having video issues with a new Z15-GH3 setup. I've soldered the yellow video and ground cables which plug into my immersionRC transmitter and the single red power lead which plugs into the left port on the transmitter as per the manual. the issue is i either get no video picture (I'm...
  12. C

    GH3 Zenmuse Questions

    Hi, I have a couple of questions about the Zenmuse for GH3 i anyone can help. I've just installed and it all seems to work as it should on the bench. My questions: On its startup procedure when it checks its roll it seems to hit the camera. Is this normal? What do you all do for camera...
Top