Search results

  1. traxx2003

    For Sale KDE Direct 18.5"x6.3 propeller set

    For sale a set of four KDE-CF 185-DP in like new conditions. They only have two test flights on them. They include four KDE prop blade adapters. These props/adapters retails for $299.70 before tax/shipping. $200 shipped within the US.
  2. traxx2003

    XAircraft EZUHF connection with SuperX

    Sure did, i had to connect all servo wires. For some reason, even dough both of them are SBus compatible, they will not work with SBus together. I believe is because SuperX uses PWM signal and EZUHF uses PPM. But don't quote me on it. But is you use one servo wire per servo, it works just fine.
  3. traxx2003

    For Sale TMotor MN4120 400kv & SuperX controller for sale

    Hello, I have for sale the following items: -XAircraft SuperX controller basic edition with XAircraft OSD module. - 4 TMotor MN4120 400KV All for $400.00 shipped within US. Extra for shipping international.
  4. traxx2003

    I'm at a lost here!!!

    Ok, so I downloaded the black box data from my SuperX, the links below are for the flight data for the two rather short test flights I did on my new build. Maybe someone can interpret the data and could possibly identify any potential discrepancies. Currently I belive I do have a sync problem...
  5. traxx2003

    I'm at a lost here!!!

    Is there a way to calibrate KDE ESC's using the transmitter manual mode? Im new to KDE ESC's.
  6. traxx2003

    I'm at a lost here!!!

    Ok, I just finished testing the motors on the ground and I quickly discovered that I do in fact have some synch issues between my MN4120 400kv and KDE 55A ESC's. This of course is to no fault from T Motor or KDE. It is virtually impossible to design a motor or a ESC that is compatible with every...
  7. traxx2003

    I'm at a lost here!!!

    Hexacrafter, I really appreciate your inputs and I welcome any suggestion / advice I can get, after all this is how you learn. Besides the fact I already had the motors, the only reason I went with KDE ESC's was because one I was looking for some high end quality ESC's and second I got a good...
  8. traxx2003

    I'm at a lost here!!!

    Hexacrafter, I'll be testing each motor with RX later on this afternoon, to answer your question why this motor /ESC combination , I already had the motors and the ESC 's, I just got a really good deal on them. $50 each new, never opened. Honestly not sure if my problem is due to comparability...
  9. traxx2003

    I'm at a lost here!!!

    Almost forgot, I'm running a 6s batt on this MT, the ESC's are KDE Direct 55a, rated up to 8S voltage. They are 55a constant and 95a burst. I thing I will test run each motor separate connecting them directly to the receiver and see how the do.
  10. traxx2003

    I'm at a lost here!!!

    Well the 17" props may be at the top of the motors I have, but according to ecalc and current AUW=4987g, the motors at hover should run around 46% throttle during hover and at around 42 degrees C. This was pretty much validated during my first hover flight with Pixhawk. It's just that that FC I...
  11. traxx2003

    I'm at a lost here!!!

    Hello everyone! First allow me to offer some details of my build and some details of the problem I'm having: Skyhero 850 X4 configuration TMotor 4120 400kv KDE 55AESC's SuperX controller 17x5.5 CF props EZUHF control system My problem: I first attempted to use a Pixhawk FC with this build but...
  12. traxx2003

    XAircraft EZUHF connection with SuperX

    No one knows how to setup ezuhf with the SuperX? PLease help and want to go flying!!!
  13. traxx2003

    XAircraft EZUHF connection with SuperX

    Hello everyone, I was wondering if someone could help me figuring out how to connect the SuperX with an EZUHF receiver. I know that the SuperX with the I/O unit V2 is now SBUS compatible. The EZUHF receiver also supports SBUS thru channel 1, as long as you set CH 1 to Muxed. But when I connect...
  14. traxx2003

    Pixhawk & KDE ESC's PWM values

    Hello! I've recently purchased a Pixhawk FC for a Skyhero 850 quad I'm building. I'm using KDE ESC's with this setup and I'm aware of the need to apply 5v to the Main output rail on the Pixhawk in order to have the KDE ESC's function properly. However I can't seem to figure out to manually set...
  15. traxx2003

    KDE Direct XF UAS ESC and Flight Controller Compatibility List

    Ok so my question is, when trying to manually set the PPM range to 1100-1900 in the mission planner for Pixhawk, you are only required to do so to the throttle channel correct? What about the other channels? I'm in the middle of a new Skyhero 850 build equipped with KDE 55A ESC's & TMotor 4120...
  16. traxx2003

    XAircraft Using SuperX following a mayor crash?

    Correction, when I noticed that the ship was not responding to my inputs, the ship gain some altitude on its own, but much, then it went left very aggressively and that's when it started to descent very rapidly and the motors where going crazy fast, as if the ship was trying to correct it self...
  17. traxx2003

    XAircraft Using SuperX following a mayor crash?

    And yes 60 feet in the air sounds about right.
  18. traxx2003

    XAircraft Using SuperX following a mayor crash?

    No, I was like 5-8 minutes into the flight, no problems at all, then all if the sudden the ship became unresponsive to my control inputs, motors continued to accelerate as the ship was coming down. I activate fail safe as a last ditch effort to save it but no luck. It crash on asphalt, it hit...
Top