Search results

Thanks I would prefer to not use a DB due to the space issues I have with the frame i am using. Is it possible to just use the connectors (xt60 harness) or something?

HI All, I am newer at building quads, and have a question about wiring: I have power leads coming from my flight controller (Naza Lite), and power leads coming from my all in one ESC controller (qbrain). Should both be connected to one battery or each be connected to their own battery's? If...

They are just spacers, not vibration dampers contrary to peoples beliefs. Nice to hear your are building a 650!

What are your thoughts of running these with 15 to 16 props http://www.fpvmodel.com/sunnysky-x4108s-480kv-outrunner-brushless-motor-for-multi-rotor-aircraft_g292.html Thanks for your help!

I see thanks... I am considering scaling back to 15 in props with the 570kv motors possibly. Any suggestions, what are your thoughts on Turnigy motors?

Thanks OM!

Looks great thanks so much for the share. Can I ask what size standoffs you are using and where you got all your parts? Where did you get the additional deck? Thanks,

Heres a breakdown of the options I am considering for motor, again my goal is to achieve efficiency while flying and have a longer flight time: 4010-485kv http://www.rc-calc.com/c/xg5cbd http://hobbyking.com/hobbyking/store...ong_Leads.html 4010-580kv http://www.rc-calc.com/c/RyQOc4...

Thanks for the response. I guess I am a little uncertain on what I need my goal is to have a quad that could fly for around 20-25mins. Here is the full setup I have been considering: Tarot 650 Frame qbrain 25A ESC Turnigy Multistar 4822-490Kv 16.5 or 17.5 CF props Go Pro DJI Naza v2 w/ GPS...

Anyone have any experience with using qbrain esc? Thoughts, suggestions? http://www.hobbyking.com/hobbyking/store/__42715__Q_Brain_4_x_25A_Brushless_Quadcopter_ESC_2_4S_3A_SBEC.html Thanks

Thanks for the information!

Struggling with trying to find a good spot for the DB board on the UAV. Any suggestions, am considering just using a wiring harness? DB: http://www.hobbyking.com/hobbyking/store/__38913__Hobbyking_Multi_Rotor_Power_Distribution_Board_DIY_8_x_output_PCB_USA_Warehouse_.html?strSearch=distribu...

thanks for sharing. I think the biggest struggle I have right now is finding the best place to put the DB on the frame. Anyone have any thoughts or suggestions? Thanks!

I know this has been discussed before but wanted to see what everyone's thoughts were on using a harness vs a DB for power from the Esc's. I'm building a Tarot 650 and the frame is extra tight on space also the carbon is conductive, so don't wanna mount the board directly on the frame. Any...

Hi All, I am building my first quad, and am quite the newbie. I am using a Tarot 650 Iron man frame and was wondering if I would be able to run the Turnigy Multistar 4822-490Kv 22Pole Multi-Rotor Outrunner with the Tarot 17x5.5 props? Would I need to get any adapters to make the props fit...