Search results

I have made progress to the point where I have usable video from my DJI S800 ; no small task, but I have just about eliminated vibration and this thing is flying great. I see a few little micro bounces in ffw, and I think I can tighten up the dampers on the mount just a bit. I would like to know...

By how much, 1 point at a time?? Bill Davenport AMA 28141

Sean & All, Looks like that did it for me also. I will say though, a couple of things- firstly, I haven't flown it. And I wish I had made changes one at a time; I took the IMU off the top crossbar, and thinking of the humidity problem, I shrunk some clear heatshrink over...

Yes, this is my 4th brushless gimbal, it is balanced correctly. Thanks, Bill Davenport AMA 28141

No, except it has been raining a LOT here lately. If I mount the IMU on the bottom, which side should be facing down? Bill Davenport AMA 28141

The Gimbal is the GotHeli, it came assembled with the IMU on the top crossbar. If it shouldn't go there, where should it go??? The mount is shaking at 55, if I turn the power up more it shakes even worse. I am still on 1.3, if I flash to 2.0b3 everything is even worse. I'll try IMU under the...

Wish they would work great on mine, mine is crap. It shakes like hell if I get the power on roll over 55 or so, not enough power to hold position. I'd send it back if I could. GotHeli, do you stand behind these? Thanks, Bill Davenport AMA 28141

Anyone??????????????????????????

I found the capture with the default settings- FYI they are Roll -18 .20 11 100 Pitch- 18 .20 6 70 . I am pretty sure these are the settings that were on it when I got it. Even going to these original settings, I am getting a slow rocking back and forth on the roll axis after it initializes...

I am getting a fast shaking in the roll if I have the power set at over 85 or so. I know I have adjusted the P, but didn't think I moved it much. Can anyone confirm anyvision's settings? I could have sworn roll power was default at 105. Thanks! Bill Davenport AMA 28141

Does anyone have the default Gothelirc settings for the gimbal on 1.3? I thaought I had a screenshot, but can't find it and I really want to start from scratch again trying to get this thing right. Thanks, Bill Davenport AMA 28141

Originally Posted by GotHeliRC Can't remembered exactly, but with 18-55mm.. 18-20-16 Power 200 (if you're using silence mode) 18-20-13 Power 120 (if you're using silence mode) What is "silence mode" ? Bill Davenport AMA 28141

Anyone?

I have one on the way, that I will use on my 6s S-800 hexa. I will need a separate lipo for the gimbal, what voltage is working best? Are the initial settings for 3s or 4s? Has anyone tried using a BEC to power the gimbal motors? Thanks, Bill Davenport AMA 28141

http://www.rcgroups.com/forums/showpost.php?p=22346589&postcount=14753 Bill Davenport AMA 28141

I couldn't get mine to work in the "off course lock POI" setting. I changed to "off POI Home Lock" and it works perfectly. Here's my test video from this morning. Sorry, I didn't have any really interesting points of interest! Bill Davenport AMA 28141 https://www.youtube.com/watch?v=twj1yqJ3FAI

Bow, You do have the Camera Lens aligned with the pivot point of the mount, right? Sounds like that could be the problem. Bill Davenport AMA 28141

I caught heck trying to get it into calibration till someone on RCG said to always stop the switch in GPS position. Works every time now. Bill Davenport AMA 28141

Thanks, It is where I work, Hodges Hobbies in South Georgia. www.hodgeshobbies.com It's a rough job but someone has to do it... Bill Davenport AMA 28141

Well, I didn't get any feedback from anyone, but I did keep on flying and adjusting yesterday with what I think is some positive results. Here's the last flight of the day after I cut the roll gains down- what a difference! I feel it is way smoother, even though the wind was higher for this one...