Search results

Hi guys, i have an apm on my quad, which works great in general (this is not my first multi or APM) and i have an issue with alt hold... I have set my midpoint, hovers at mid stick, but all the time in alt hold or loiter it will ascend slowly or descend slowly until i make a correction. Not...

Thought so.. but for me its a little problem... i live on an island in thailand and 'things' to make stuff are hard to get, also order from hobbyking takes 3-5 weeks to get here. I'm gonna try and mod this to see if i can get a decent result.... hey i've got nothing to lose right! Thanks guys Tim

What no response?

Hey guys, I'm relatively new to fpv, and i have already some rhcp cloverleaf antennas. I recently bought immersion rc duo rx and a patch antenna to go with it. When i got these i realized that the patch antenna is this one...

Hi, I have a y6 with pixhawk, motors are hk 4822 690kv, 45A multistar esc. When i start the motors, it seems like one of the motors runs slow until more throttle (i think i must replace this esc) but also if i put min throttle, and leave it, i can kinda hear my motor 'gaining' speed. My...

but maybe even if it fails completely (the fc will still have bec) the electricity will still have a clear path? My last y6 crash was caused by 30 mins (3 batt) non stop and the attopilot got hot, the resistors melted off. Camera and gimbal, plus broken copter in a tree.

Hi guys, I have a large y6, which was flying great and then the 90A attopilot i had, got too hot and the resistors moved, which caused a weird power spike and a crash. i was wondering if it is possible to use the 3dr power module, but on a paralell feed to the pdb for redundancy. Obviously i...

hey eric, i also fly MR on samui, where do you fly normally? what batteries will you be using?

no-one has any idea? I was sure someone would have tried this before...

shutter release mod« on: Today at 15:22:10 » Quote Modify Trying to figure out if there is a way to mod this remote http://www.jjc.cc/products_info.asp?id=60&cid=0&pid=1&s_series=all To accept in input for trigger etc from pix hawk or apm? I'm sure there must be a way to do it.. I...

Trying to figure out if there is a way to mod this remote http://www.jjc.cc/products_info.asp?id=60&cid=0&pid=1&s_series=all To accept in input for trigger etc from pix hawk or apm? I'm sure there must be a way to do it.. I have a nice Fuji camera that i am flying with, but it does not...

hi guys, i have just installed my newly flashed blheli plush 40A esc, and every joint is soldered. However, the rx signal doesn't seem to be getting through to all escs. When all linked together, i cannot calibrate all.... also there are sometimes 'part tones coming out from the esc. I.E...