Search results

I choose the wookong because i had a heavy lifter hexa naza with the gps addon that came later and im used to the simplicity. I want the cine 8 frame for the smoothest flight and its ability to remove all the ugly vibrations that give bad video. I went for the 2 axis cine gimbal because people...

I'm building a cine star 8 that's going to carry the cine star 2-axis gimbal and a gh2 for aerial video. I'm trusting the avrotos 2814 since they gave me excellent reliability on my previous hexa frame. What esc's would a frame like this need? My previous ESCs running on the avrotos were...

Dewster, That's terrible to head. Which props were they and where did you buy them from?

I have that sedna-sanity hybrid patch on a 64GB 45mb/s card and it works flawlessly on 24p and 30p(no audio). I've got a 32Gb card that does 25mb/s and it fails writing on 30p so those extra mb/s are useful.

Hey guys, first timer on this thread. All of these were taken in the same afternoon with the Gh2 on raw they colors have been exaggerated in some to add in a little drama.

Hey guys great videos! I don't usually post on this forum very often but I think this one belongs here.

Be very careful when you plug in that 4S for the first time, the helicopter can take off at idle if its too light.

Gotcha, I'm not using s-bus.

I'm trying to stay away from the buddy box so both don't have to be tethered. What did you meant by std rx? Lets say He's got spektrum will the other receiver have to be the same or can we have his spektrum and my futaba?

Make sure the Naza is at the very center of the multicopter. Most importantly make sure it's parallel with the frame (even if its slanted off a couple millimeters onto one side it will not hover) If it doesn't hover after checking that then your cg is probably off, there are threads and...

Hi guys, I want to plug in one receiver that will control the channels for just flying the helicopter and the other receiver will be plugged into the gimbal inputs. The idea is so to have two people on separate controllers but I don't know if the Naza will like two receivers I want to know if...

Do you notice a boost in reaction time going from 6v to 7v to 7.5v or higher with the stock servos?

I run almost all my footage through cs 5.5 warp stabilizer, although my footage is already stable as it is, applying the tool gives it that steady cam feel plus you don't lose that much resolution. Here's a sample to show you what I'm talking about.

Hey guys, I made this a couple of weeks back. Enjoy!

I have a new av130 (purchased last month) and I like it a lot. I'd love to know what you and Photohigher have on mind soon.

I had to put in a 5Amp 6V BEC to power the gimbal. It handles the GH2 way better rather than when it was fed by the DJI Naza. You can't do much about that noise, it sounds like you're in downtown new york.

Hi guys, I can only seem to fly with Attitude mode, once its in the air it flies itself, but when I switch to manual it goes out of control, what do you guys do to make Manual mode more bareable?