Search results

You were right! Replaced with IMU V2!! but had the same trouble. I turned off the low voltage alarm and BANG no more trouble with green light. LED if defective, that should be orange, not greem. I have the new IMU V2 now

sounds like a good idea

HI! I have the RSGS and one AV130. I did spent many hours on it but it's a Gimbal game. I finally got acceptable stabilization what that RSGS and AV130 but what I need if perfect shots! I'm on my way to test some cheap brushless gimbal for my NEX7 as soon as I receive it. I know I will...

Thanks! Subscribed to see more pictures and/or videos!

HI Tom! the web site you listed about the Gimbal does not seem to bu up and running. Where did you got your parts for the Vulcan frame? It's a nice flight time, I assume it's without camera load. ok just found it: http://www.shop.rotorsandaerialmedia.com. It's like the cinestar clone with...

Any update on your Build? I'm looking at the Vulcan frame for our winter build! what Flight times? Any video shot with it yet?

Any update, Ihave the same problem. On my side, it looks like it happen when I raise the throttle fast to climb fast.

Same trouble for me... Rapid continuous green flashing led. When I fly easy and smooth, it seem ok but as soon as I raise throttle rapidly, the rapid continuous green led starts and stay there. According to what I've read, it can be caused by Bad IMU (defective), bad IMU location (ie. too close...

stay away from OnlyFlyingMachines, priced too high!!! and this guy seem to be work tasks overloaded and rush it's builds and dont really build them as you want! Got one from him... it's a mistake, I have spent so many hours to get the MR that way I wanted it!

Right! I have checked balancing of the NEX7. Not perfect at the moment I will rework on that tonight! Will test the whole setup for real this week-end as I have to take some aerial video for a friend that want to shoot for a University work (video clip).

HI Ken, thanks for the welcome ;) I finally fixed it all! BUt like you said, after removing again the tray and checking the parts and scews and re-installed, I got \\\PAN SHAKING LIKE HELL///! :upset:... I decided to add some double sided tape just behind the RSGS module where the screw goes...

Update: Fixed the Pan servo problem by playing with Trims/Sub Trims bu I have to adjust them each time I start the Gimbal. Other problem... When I unscrewed the camera tray to try balancing my NEX7 and after I re-installed it i got some Incredible tilt shaking. This make the videos totally...

I again agree. I think they have nothing to care about end users like me and you now! They carbon molded brushless gimbal is so pricey that it's easy to understand that they are focusing on an other level of customers. I wish I should have found this forum before I bought this AV130 with RSGS...

I agree with Macsgrafs but for the many of us using PH Gimbals, an upgrade kit to go brushless would be interesting no? emailed PH several time to get help and guess what??? never replied! But the worst thing is their Skyline. Take a moment and check their new Gimbal priced at $$ $$$!!!

HI! thanks for the reply! I had checked on the PAN Servo on the AV130 and there is no potentiometer on it... I am missing something?

Really interesting, keep us updated!

Right! I have not tried it but I've searched to learn more about TX and Servo. I suspect the Servo is bad but before, I will try reducing the throws on the stick where I configured the Pan function. I look forward to test my Nex7 on this gimbal! But it's annoying that when I connect the...

For now, I'm still fighting with Pan servo. I power the servo direct on RX, I used sub Trim but it still drift/glitch all the time. What you did to fix that Tom?

... :nevreness: not roll, sorry I meant Pan. Tilt and Roll are good. I will give it a try tonight. Thanks for your help tom, it's really appreciated.

I just checked in the Skyline Software and find no Pan Stabilization option to turn it off. In only have the reverse option check box How do you control the roll servo directly on RX and adjust TX settings? I have Skyline software v2.2.0