Search results

my black has the latest firmware, 32g memory chips they sell on the gp site and mine won't do anything but 1080 60p, 30p and all the 720 modes. it will not record 2. or 4k anything for more than a minute. the camera just stops recording like you pushed the start/stop button. POS. untill i...

my cameraman jcmonty has it and i've flown it a little. Great little rig. his is our main stills rig at the moment.

none of them are as compatible as ezuhf.... sherrer was a big deal when these came out, but there just aint a comparison a few years later. with a 4c lite rx, you can stream up to 12ch ppm. ezuhf is fully compatible with every radio on the market, dragon only works well with turnigy 9x, sheerer...

that's video gear. i use 2.4 lawmate...... when i forst got going in fpv i flailed along till i followed a tbs build part list then everything just worked, and worked good. that is pixim seawolf cameras, lawmate 2.4 video, ezuhf rc..... looks like this this was my first fpv plane and used...

ezuhf on futabas, like 8j

i don't sell anything per say, i sell builds using this stuff.....

the camera i was suggesting is a 12volt input only.... hero has it's own power and the immersion 5.8 vtx is good from 2-6s power in. that's the best bang for what your doing. We use it alot on the camera mans view...... from hero to reds

I've been flying this one on naza gps and it's all it seems to need. I'll try getting video of it in the sky, it'll shock ya..... 11x5 props on 4s right now. Crazy smooth but not very fast in fff. It's still faster than my camera can handle so that's a plus

the hexacrafter brushless......

this things flying daily, holding up like a champ and fits in the front seat of my truck... diggin that, now i can stop and eat. now that i got the right props and gains, i'm digging theese AMP 2814's.... there all broke in, ton of power, smooth as heck.

yes,,,,,, does 10" props, or i believe can fit 11's

does that mean you have cores in stock? chip chip?

surging has alot of meanings. too high of gains generaly looks like a vibration and it goes away when you lower the gain. if it's loose like comes down and has one angle, flops to another angle, it's too low. i never liked my atti gains much higher than 100, usually settle in around 80 ish

the team black sheep core is a really big deal, especialy with getting a camera like this. it has a solid filtered 12v power supply but it also has a pretty simple osd that prevents alot of problems. mainly shows voltage, mah used and if you have it, an rssi value like frsky or ezuhf type of...

you want the set screw type. make sure to grind flats on the motor shafts so if it does come loose, it won't leave immediately and let you time to catch it being loose. they look right

these are all i use, sell and suggest http://www.securitycamera2000.com/products/690TVL-Ultra-WDR-Pixim-SEAWOLF-Sensor-Chip-OSD-Camera-2.8mm-Wide-View.html

john, how do you even have 50p as an option? mine has 30 or 60.....

mine wouldn't talk at first either and i passed it off to a guy that tried and it eventualy worked. some of the details on i2c errors are make sure your wire from imu to board is less than 25cm,,,, make sure the solder is on both sides of the board where the imu hooks up. you have to get it to...

apc have the right size hole if theres an 8" prop in left and right.... reaming props is pretty easy assuming there is enough meat around the hub to support it. buy a prop reamer if you do it.

it's a great kit, tell him to get it