Search results

  1. roryhinds

    Tiger Motor ESC T70A pro - For SALE

    I have 8 x T70A Pro ESC's for sale, these are brand new, never flown. They have bullet connectors soldered on and ready to go. $100 each with free shipping within the USA. contact me at rory"at"minefilms"dot"com
  2. roryhinds

    DJI A2 Failure Videos

    how do you downgrade?
  3. roryhinds

    DJI has released its 2.4G Full HD digital video downlink, the DJI Lightbridge

    this seems like such a restricted product that only works for the single operator phantom uses. DJI created a product that drowns out the signal so you're forced to run all coms through the LightBridge but this doesn't work in a professional 2 operator setup.
  4. roryhinds

    A2 ESC Calibration

    great minds :-) I'm flying a SkyJib with Tiger U7's to carry my Epic.
  5. roryhinds

    A2 ESC Calibration

    I had to map the Throttle on my Futaba T14 to Channel 10 so I could mapped the D4 on the A2 to Channel 10 and control the throttle. All Tiger ESC calibrated now.
  6. roryhinds

    A2 ESC Calibration

    how do you do this with A2 version 1.3 I can't seem to do it as the software won't let map the Throttle to D channel
  7. roryhinds

    Aeronavics / Droidworx U7 Motor mounts for skyjib coax

    Which SkyJib motor mounts are you using to achieve this? The mounts I have from my SkyJib do not line up, the Tiger Motor hole pattern is larger and the SkyJib mount holes can't reach them.
  8. roryhinds

    Aeronavics / Droidworx U7 Motor mounts for skyjib coax

    Looks like Loctite, can you not just scrap it off and remove it.
  9. roryhinds

    Aeronavics / Droidworx U7 Motor mounts for skyjib coax

    Doesn't this look like Loctite? Can you not just scrap it off and remove it?
  10. roryhinds

    Aeronavics / Droidworx U7 Motor mounts for skyjib coax

    I spoke to Droidworx themselves who have a Coaxial Skyjib with the U7's running really well. The 420KV would be a better suit than the 490Kv… no?
  11. roryhinds

    Aeronavics / Droidworx U7 Motor mounts for skyjib coax

    the contemplates are strengthened with the cage. I can see the centre plate being a problem if you don't use the cage but with the cage its a solid strong construction.
  12. roryhinds

    Aeronavics / Droidworx U7 Motor mounts for skyjib coax

    Hi Steve I assume you have to take the motor apart to put the screw in the put it back together and mount it? ====== Never mind, I'm an idiot and just figured it out.
  13. roryhinds

    T-Motor 15x5 Carbon Props x 10

    Selling brand new Carbon Fibre 15.5 props by Tiger Motors. I have 5 pairs. Never flown, totally unused. Only opened one box to check them. Clearing my stock to release funds. $340 for the 10 with free shipping within the US. Please contact me at rory"at"minefilms"dot"com
  14. roryhinds

    Tiger Motor MT3520/11

    Selling my MT3520/11 motors which have been on my SkyJib 8 They have about 20 minutes flight time on them. Great motors, just moving my stock for other gear They come with short shaft adaptors which cost $6 each. I have 8 of them and selling them for $65 each. Will offer free shipping within...
  15. roryhinds

    gStabiH14 - 14lbs / 6.4kg gimbal @ NAB 2014

    gStabiH14 used in inverted mode with EPIC - new possibilities are opening up daily
  16. roryhinds

    gStabiH14 - 14lbs / 6.4kg gimbal @ NAB 2014

    You'll be changing the weight and position of COG of the camera when you change the lens so yes you'll need to re-balance to get near perfect COG. You should not have to change the PID values though, unless that is if you use a completely different camera and lens setup. The software allows for...
  17. roryhinds

    gStabiH14 - 14lbs / 6.4kg gimbal @ NAB 2014

    and here are some screen grabs from the Mac software which looks and behaves the same as the PC software.
  18. roryhinds

    gStabiH14 - 14lbs / 6.4kg gimbal @ NAB 2014

    its their own board, not the AlexMos. They also designed their own motors so its a totally custom package, tuned for heavy payloads. Here is a video showing the iPad app and controlling the gimbal with iPad gestures https://vimeo.com/88507071
Top