Search results

Smartaerials, do you happen to know how the temperature on the ESC is measured, I mean whe the sensor is placed? This setup was used to inspect a boiler, totally dark inside. Got great results with the flash, but we are working on other solutions as well. It cannot be bigger or wont fit...

Hello Smartaerials, what I cannot understand is how am I pushing the limit on the BL-Ctrls 2.0 if they are rated to 35A continuous, and the setup is not even taking 15A? Take a look at one of the last log files: Flight date: 26/02/2015 13:45:55 Flight time: 13:45:55.0 - 13:49:56.2 (241 secs...

Smartaerials, the AUW on this setup is 4,2kg.

Steve, I managed to make it work. As we launch MK Tools, the first connected board is Navi Ctrl. I was trying to press "ctrl settings" from the Flight Ctrl board, and the error messages persisted. When I switch back to Navi Ctrl and press "ctrl settind" it works fine. I calibrated the current...

Steve, here are the readings from each motor/bl-ctrl: Motor # / Slider Position / Current Value 1 / 34 / 1.9A 2 / 34 / 1.8A 3 / 34 / 1.9A 4 / 34 / 1.8A 1 / 70 / 5.2A 2 / 70 / 5.0A 3 / 70 / 5.2A 4 / 70 / 5.0A 1 / 120 / 14.3A 2 / 120 / 13.8A 3 / 120 / 14.3A 4 / 120 / 13.9A Well, it looks like...

Steve, as I press "ctrl + settings" to go to adjustment dialog box I get this error: "Bl-Ctrl hardware has no configuration support". Should I connect each Bl-Ctrl indiviadually as if I was updating firmware as described here? http://wiki.mikrokopter.de/en/SoftwareUpdate Thanks, Marcelo.

Hi Steve, flight permormance is ok, and BL-Ctrs have apparently same temperature after flight, at least by fingertip sensitivity. I would imagine those two would be much hotter then the others, but not. What I really think is strange is the fact that 2 out of 4 displays same problems. I just...

Smartaerials, that is definitively not a possibility, because as soon as you startup motors, before taking off, the readings are way off. I even tried flying with the battery pack moved to the side, but nothing changed much.

Hello all, I recently put together a new distribution board with 4 new BLCtrls 2.0, this is the setup: Mikrokopter Flight Ctrl Board HW V2.0 / SW V2.08a Mikrokopter Navi Ctrl Board HW V1.1 / SW V2.08a MK3 Mag V0.23a BL Ctrl V0.31 Axi 2820/14 motors APC 14 x 4.7 slow flyers Quadro X...