Search results

On top is the servos signal white or orange/yellow. middle it red/plus and bottom is black/gnd, same for the other plug side of the MC Boris

Gunter dont have to, just try it with them on. It a b...ch confgirung the ESCs afterwards without it. If the ESCs get to hot than you can consider. Boris

whats going on dave were are the problems/questions with the config ?

I actually started to use the digital trim on my Graupner. To start the engines I trim the throttle until the motors start. Now i know bringing down the throttle all the way will not kill the motors. Landing it the motors are switched of by bringing the trim down again. I dont know how your...

okay final with roll-cage, got a price for doing this thing today and i must say not bad for a single piece around 100 Euros. But it wont be one piece the bars of the roll-cage will be screwed together. (edit) thanks once more redridinghood, ordered the stuff today didn't even think in that...

haha love it :)

Hi redridinghood I have seen it and i got my ideas from it. It doesn't fit on my CineStar frame though and i want to additionally add a rolling cage to my heat-sink. And the roll-cage will give some mounting possibility for my thick ppm cables coming from the Herkules and the motor cables...

japp i was always wondering how the MK Dist borad does it with these small pads for soldering on the Lipos and now some use it in a Skyjib with 8 plettis. At the moment i have no problem with the abuse mark board on my WKM hexa with axi 2820, but i will install a second board each board handling...

By the way i think ken is using this board http://www.fpv4ever.com/lang-en/chassis-par-kim/189-circuit-de-distribution.html and there is also this one http://photoshipone.com/shop/index.php?main_page=product_info&cPath=40&products_id=250 Boris

Im my eyes the abuse mark board just makes sense. Much lighter than any wire dist solution and if you are worried about the current is can take just use two. Another positive thing about it, you will have soldering pads free so if you need an additional output just solder some additional wires...

I got my PMU unit late so I never tried the voltage monitoring "compromise" they offer. Will be flying this weekend again and i will keep an eye on it. I think ken also didn't use it yet. I will also try 14 4 and 14 4.7 on my hexa this weekend. My bad results were at the point were i still...

I havent seen or heard of a similar situation with the yaw like you are experiencing very strange. After having seen your bird i think its best to forget about all the setting from Ken and me (or maybe use kens when he first tried the WKM on a Quad) but i think you will be best off with default...

it does, but i always makes problems I'll just get Rhino wish it would be working on OSX already thanks !

Gunther what i dont get is I can open the DWG in my for free CAD viewer but archicad 13 is telling me every-time i want to open it no lines were drawn. Do you have a clue what that could be ?

expenses expenses :) now i want it. Its that procedure your talking about http://www.a-mbs.de/ ? first picture. I got this thermal tape http://at.rs-online.com/web/p/waermeleitende-isolatoren/7074774/ should be right or ? 0.5mm 12Kv/mm 12.0v/MK, who ever needs some tell me i want need all ...

ovdt how big is your bird and if you using the MT 550 KV i can imagine that your bird needs more gain than mine. Not sure but your setting are going to be different for sure.

two question, maybe someone knows: these plugs are they standard plugs and does someone know where i can get them or are they home grown DJI ? For example the plug from the IMU to the MC. Heat sink are most of the time alu and painted will any paint do or is there special paint for this ?

Once more thanks Gunter !!! Bottom side and top side of the heat sink

ah sorry im being stupid H is for Heli, hehe got it :)

dont get it whats going on ? Wookong - H is new hardware or new features. concerning the non lite version ? New Product Announcement 10th October, 2011 HOME > New Product Announcement DJI Innovations is proud to introduce two new products in the coming weeks. We continue to expand our...