Search results

Hmm i was pretty sure its only the compass and the GPS unit itself in the. I am going to calibrate it again and see what happens. It could be that a calibration before you pick up the bird to turn it, he takes the gyro values a being level and since i had only one lipo in it on the front side...

Took it up today for the first tests two small 1800 mahs 4s and i am getting a strong drift backwards. Bird is leveling out and i drifts back. TX is configured correctly. Mount IMU is correct. Gains are okay steady go in the air as long as i manually trim it. Any ideas what else it could be...

Ross one thing i did last time with be CS 8 Build. Is that i let someone hold it above his head and tested all functions forward backwards left right yaw etc. Eventually i took off from the person hands after getting the feedback that it wants to take off nicely upwards. Could be a way to go...

Thanks !, okay i am going to stick with the slight slant also dont think its a prob. I wonder if the little module on the GPS cable has any other purpose than splitting the or hubbing the canbus signal. I would really like to get rid of it. Boris

okay think that works, hope the gps module is not to close to the IMU. Will have to cut a hole in the hood for the cable which i really dont like !

okay i will just fly them and see if i notice some wierdness etc. Do we know anything if the GPS module has to be mounted perfectly horizonal level ? Its only indicated that the red arrow has to point forward. Would a slant of lets say 10 degrees massively influence the compass ?

Gunter thanks ! Did you test all the setting from the ESCs timing etc always stayed the same ? And you flew with the clicking ? Thanks Boris

hmm with 3x 1.6 4s lipos on and still messy cabling i am at 1.746 kg, little much for my taste, but thats the compromise for all the s..t inside

hmm strage knocking noises from the motors on all four. Never had that probably the ESCs or their settings, or is it normal ?

sometimes just all about the fun. They are removed fast if necessary :) It not like I need a quad thats all about performance

nah at 12.5 v more it not possible otherwise they get warm but perfect for the cc pro bec drawing maybe 1.5 A max it all should be fine. Thank for the pdf ! the one i found on the website was only for 6 v. lets see what in the catalog pdf. Boris

I think it will make it and stick two 1.6 mAh 4s in the back so altogether 4800 mAh. Want to keep the bats inside. Think that the whole point of the CX everything possible inside to fly in winter wet like conditions. I am a very lucky man a hobby king store opened 5 mins away from my place I...

If me idiot wont have forgotten to order the prop mounts with the axis and than would have ordered the right prop mounts the second time :) i would be flying already. I want to mount the GPS as low a possible, i know it sounds stupid but i ruins the look if its to high. I am going to create...

I got one the Link and the CC pro bec, thanks Boris

I wonder if its an issue if a spray paint the GPS module, dont want that white DJI logo thingi on the bird.

Hi Dave thanks. I got the CC Pro bec just for the leds :) and i will have them running at 12.5 V arround 2 3 A depending if i will add more. I still want to give it a red *** :) With 12.5 v its fine. if i hook them up directly to the 4s its super bright retina imprints for 5 mins, but not...

Gunter if you find it and the time for searching please send it. The leds draw quite a bit and get hot so i will need to switch them from the remote. In the winter great to keep the IMU warm :) in the summer maybe a problem Thanks

Hmm my C8 is 2834 g without AV 130, otherwise RTF Exclude 8 x QCs 139g incl. cables bullets = 1112 g - DJi WKM 150 g - 2 x Herkules ? - Heat sink around 80g with roll cage - Unilog ? - Futaba RX ? - Cables ? minu known numbers we are at 1.492 total minus the parts were i was to lazy to look up...

Anybody now any remote led switches ? question if it would work if i have futaba s-bus. Of coarse some of the channel plugs are free on the RX but if i can still use them ?

Yeah well once you start talking about 26 minutes its obvious what i want to have now :) Just gonna try the QC more or less the same as the AXI 2814 on a 5s.