Search results

1. If you want to be in the safe safe safe side do the distro yourself. 2. Safe safe side take two distboards. 3. Safe side one distboard. If you want to safe your 5 kg octo from a crash and you are in the situation were you have to give full throttle to catch it the current can be very...

I think its primarily in combo with FW on. I dont get any of this with my CX WKM Herk and FW off. Just mounted some QC equivalent motors on the CX and will do some more test with all different DEG and FW on or off to pinpoint it more. Boris

How is the build coming along i would be very interested to hear you experience of the makrolon used with a productive copter. Just ordered a sheet and want to build a small bird only out if Makrolon. Similar to something like this http://www.hoverthings.com/frame-sets/vc450dc.html Boris

I am not sure if i understand you correctly. With flight modes you mean you own personall radio based flight modes not those of the WKM as in Manual atitude gps ? Boris

With any of these three you will be more than euipped for the WKM. If they change the channel issue than only based on s-bus. R6203SB 3/18 Channel High Voltage S.Bus Receiver Stock Number: FUTL7665 Dimensions: 0.88 x 1.44 x 0.38 in (22.5 x 37 x 9 mm) Weight: 0.25 oz (7.2 g)...

dammm wrong thread sorry :)

shfolier, this is a misunderstanding. There is no way at the moment to operate all the feature of the WKM. With a traditional RX that would have enough channels there are just not enough channel ports on the MC. X2 and X3 can only be used once. So X2 and X3 can do one of the four following Basic...

Hi Kari, ich wrote to them directly and asked them for a opto version. Was a little bit of a hassle to get them first since they said there is a reseller in my country. After checking the resellers page and the lack of info given, even worse than the maytech :) page I insisted to buy from them...

4s 5s 6s ..... indicates the amount of cells in a lipo, thus the more cells in a lipo the higher the voltage of a lipo. A cells has 3.7 V so a 4s lipo would be 14.8 v, 5s would be + 3.7 so 18.5. In a charged state a lipo cell gets up to 4.2 volts so a 4s will be 16.8 Boris

yeah no worries the pad take enough and servo cables are thick enough there will not be so much current flowing, no worries !

Jappie I think the traco can only give out 1A or ? that wouldnt be enough for your Ubec both seros on your AV 200. You have enough connection possibilities on your octo dist board to connect the ubec directly to the man voltage and than to the AV 200 servos.

We just made it in time chinese new year holidays start on the 15 to the 30 Jan :) By the way i wil be laughing my *** off when we get them and they dont work because they are V2 and something change ansd they are not compatible to WKM anymore :) Boris

Japp and it would be great if DJI would add some additional virtual X2 X3 X...... channels/ports so we could use them all together and dont have to sacrifice one feature for the other. We should start spaming them with this request !! :)

I like this. The KW (kopterworx motors) have the counter bullets connectors already with them. One less car ride to the closest RC store safed. Nice one.

Coming on in the next couple hours. Those i am really looking forward to !!!! Boris

Just got myself the Tilt mount for the CX, Anybody any experiences yet. Unbelievable how much nothing can cost :) Maybe should have asked before i bought it ;)

just that you guys are aware, it will probably not come to this, but the setup is capable of dealing with more A so the distboard would be the week link...

Use an extra motor mount and just mount it on the booms. If it works without the actual pole stick that comes along with it that would a prefect solution. Less risk of the pole breaking etc. Tape GPD module to extra motor mount Boris

Ah damm i didnt catch on to that. I hope they still have the ability, lets see. No use to ask now if true they are shipped already. Boris

Just ordered 8 MT35A-OPTO-V2 directly from maytech, lets see what they can do. Gonna put them on my hexa first and check out their performance.