Search results

Okay Graupner Current sensor powers RX RX power remote for Switch and Switch itself: Nothing else need no BEC or RX Lipo. But this only in the case if the Safety Switch doesnt power the Remote switch already and then the remote thing and the RX. If that the case than you see sparks if you...

Ah okay and than thats also the setup wait now i know what you have to do ! Ill draw it up.

nah sorry for the false alert the graupner module does feed itself and docent need an external power supply. The info was misleading !

Seems like it also need input voltage: Specification <tbody> Dimensions (LxWxH) 51 x 47 x 18 mm Operating voltage 3,6 ... 8,4 V </tbody> Which is really stupid. ( Sorry don't want to rag on it ) but its on the main lipo, it should have an internal voltage regulator and power itself...

First thing i would do is to hook the power switch and the power remote thingi together and hook it up to a lipo. Take a multimeter and measure if there is a voltage output that could power the RC : Here like in the diagram. If there is not than the BEC solution would be the next attempt. In...

wow you are super luckily on that one ! Happy for you that nothing worse happened !!! ezUHF is a tricky one and strange if it looses PPM signal from the trainer port it doesnt go into failsage right away, only if you pull the power plug. But I guess it was different for you ! Boris

Most of the telemetry Voltage and Current sensors are able to power the main logging unit and the rest of the sensors, so why didn't they think of their power switch being able of powering the Switch remote and the RX, or maybe it does ! Boris

Think thats the way it could be done with a BEC. Bec in this case could be a CC BEC And thats the way it would be cool if they would have thought about it. Although they don't really indicate where the RX is powered from Boris

Very nice Bart. Just for the fun of it I think I am going to try it out. Do you think that sticking the Frame with the plastic into a normal kitchen oven would also work ? Just don't want to deal with another thing standing in my apartment :) Agree on the space for a crush zone when it comes...

Actually what i am getting at is if your RX can work with 4.8 v for example like the futaba SB series than a CC pro bec could do the job: Input 5v to 25.2vVoltage: (2S to 6S LiPo) Default setting: 5.1 volts. User selectable in 1/10th volt incrementsbetween 4.8 and 9 volts.

Depends on the BEC. The first component that has to be powered is you RX powering the SPS-RCS than the power switch or ? Or does the power switch power backward to the SPS-RCS and than the Receiver which would be great !

which kind is it ? this one ? http://shop.rc-electronic.com/e-vendo.php?shop=k_emcotec_e&SessionId=&a=article&ProdNr=A11071&t=11&c=39&p=39 Boris (edit) nah something more like this or ? http://www.hkm-models.com/images/Anleitung_SPS_EN.pdf

Hmm not really see a problem there. BEC to RX powered from the main battery, switch on the system from your Radio. I don't see any GND loops that wouldn't be there anyways. But i don't have any experience with remote power switches ! I was just thinking in my terms I always forgot stuff and...

The system is similar but again has nothing to do with the Rc carbon frames that used to be around on the past. Although the RC carbon frames were good but lacked quality the carbon core seems to be well designed and took care of all the little faults and wiggles the RC carbon had. I was...

Not only domes but it would be cool to make a little acrylic adapter plate to use one of these at the end of the booms and cover it with a polycarbonate clear transparent shape: At the same time why big domes. Make them formed to your components you have on your center plate. Only couple cm...

Hi Ryan, why are you planning on powering the RX separately ? Its just another LIPO to take care of and check that its not low etc. Boris

Hi Alex, No it was actually CNCed. Polycarbonate like Makrolon just like Lexan, cant be cut by the laser cutter or at least not by the one close to me. Close to finishing up. I decided not to install GPS tracking just to much hassle and I don't like sticking extra GPS units on my birds just...

As far as i know its all the same lexan and makrolon just product names, the actual material is polycarbonate or ?

Guys this is just cool stuff ! The prices on these Domes normally and the shapes one could make I personally think make this a very fun project ! Boris

Hi Vojec, At the moment WIfi and Hdmi out at the same time don't seem to work ! I will check again tonite and hit you with the rest of the infos you wanted. Boris