Search results

Does anyone have a diagram for how to build a cable to both grab video out and be able to send 5v into the camera via the Mini USB port . I have built one for video out only, but not sure which USB pins to use for the power supply.

Yeah, sounds like a GPS issue. Let use know if plugging the antenna in helps

Nothing much to it just says big news coming soon. All speculation right now.

Either a ground station with improved GPS function or A brushless controller (stepper motors?) I can't imaging them spending all if this time without requiring users to purchase something new, but I do hope for better GPS function with current hardware,crossing fingers....

Yeah, that would be great, but when run through the HFP these esc's are not all playing nice at the same time, so that won't work. Going though the long process one more time to make sure they are all on 16hz

Thanks guys. I was able to connect to the software and set all of the necessary end points by disconnecting all of the ESC's except the one with the red wire. (these esc have bec built in). I still get weird behavior in two of the motors. I have programmed the ESCs both by radio (holy PITA...

I figured I would try some Hobbyking Blue Series esc's. I built an X8 with HK blueseries 50 amp esc. When hooking up to the set-up client, I am able to connect to the General Tab, but when I hook up the battery to use the Radio to set gains and test function, it doesn't work. Also, the esc's...

If you are in the US, make sure to get a 110v not 220. Du-bro has been the best balancer I have used.

I need some advice. I have not touched the tuning on my HoverflyGimbal board in a while, but just put a different camera on. I need to change the gains and can't get the Servo enabled in the set-up utility. I even tried updating to Rev 3, (which says it updated but still say Rev 2 in the...

I am still really struggling with this. Now that I have the a 5D Mark III as well, it is even worse when using live view for stills through the HDMI port. Not only is there a delay, but the live view shifts part way out of the screen (on the ground station) and takes a few more seconds to get...

Have you made sure to flash both boards with the same version firmware? Is your antenna properly attached? I have had issues initializing with GPS installed with faulty GPS antenna wires. I would try to re-flash your boards first.

I just got an order of JFX 14x5 beechwood props in the mail. I ordered more than I need. $130 for all 4 pairs shipped. (4 counter rotating and 4 regular rotating props) I will ship these in the US only.

So what color is the light flashing? Do you have the GPS board connected (guessing not)? What beeps are you hearing? And I am sure other are wondering this too, but why algae you not upgrades to 4.8? I can't help without a bit more info. Lastly, how are your ESC red wires connected? Just one or...

How do you have the AV200 connected to your AD6? Also, have you balanced your props and motors? Post a photo of your set-up.

I am also looking for Xoar or JXF 14x5 in stock. And no, I won't pay $35+ a "precision" pair. Let me know if you have anything. I have a bunch on order, but they won't arrive for a while as they are back ordered.

You will get WAY better service going with Cinestar (freefly). Just a consideration if you are just getting into all I this.

This may be a coax prop question, or it may not. I fly Hoverfly Pro on a Coax xy8 and x8. Both with avroto 2814 on 4s. I have tried xoar 12x6 top and bottom, 12x6 top/13x7 bottom and the best results seems to be 12x6 xoar top and 13x6.5 APC e-prop bottom. I get perfect 50% throttle but gains...

I might sell you the one I took out. I put the Roll servo on the Pan and upgraded the Tilt and Roll to MKS servos. It is working fine., but thought I would put a stronger servo in.

There will be a way to do it, but I think it will defeat some of the point of Brushless (direct Drive). The gear mechanisms on roll and the tiny bearing on the tilt are week points of the AV series. I think it is going to be easy and cheap to build brushless direct drive gimbal frames. I have...

Which one would you suggest? I thought some were not up for the task.