Search results

I have a nex-7.. do I just setup the camera to "remote cdr" mode to accept the signal? I will put it on a 3 position switch to get both photo and video. KS

Just order 2.. can't wait...:) Base on what I read and saw.. this is going to be awesome on my rig.

So, I have been watching and reading.. and now I am wanting to pursue some video feed to a screen. Not necessary for FPV only, but more for camera operator hooked on to the Zenmuse in a 2 man op. I have heard certain frequency messes up with GPS (certain brand), and other gotchas.. Can I get...

Totality, I am in process of wrapping my S800 arms in carbon-fiber... hopefully that will help with the arms vibration or flexing. I have the S800/Zen and with 2 6000 mah, seems like the arms are flexing more. But again, there are 6 arms, and I am only testing the lift with 2 arms. I was...

Thanks FerdinandK.. When you say recalibrate, I assume that is rebalance? I did not know you can calibrate the Zen15. I recall somewhere in the forum or RCG, they said that users could not calibrate the Zenmuse. Can you clarify recalibrating process? I searched the manual and did not see...

Wondering if any has gone through the same as me. I purchase the Zenmuse for the Nex 5n, but now getting ready to order the NEX and decided check out the 7 for the still shots. I have the Zenmuse for 5n in hand.. but wondering if I can just move stuff around to fit the NEX 7.. and try to...

Thanks Tim, Paypal'd.. now I have a backup spare kit. Looking forward to the package. KS

you can still get on a COA if you can meet the requirements.. http://www.faa.gov/about/initiatives/uas/ Proof of insurance/liability, experimental aircraft air worthiness certificate, depends on FAA inspector you talk to, but medical.. since you are considered a pilot in the FAA's eyes... then...

@rocketman2012, connect to the WKM and reference the TX monitor page while you switch between GPS/ATTI/MAN... at same time, look at your TX screen toward the bottom.. something like "NORMAL, IDLEUP1, IDLEUP2, IDLEUP3, HOLD" will be displayed.. Can you tell me if those change when switching...

Yes, mine did similar when I went from a Quad frame to a Hexa. The WKM Assistant frame type was incorrect and once I set the correct configuration "Hexa", the beep stopped. At least that was my issue.

When I got my 8fg super out of the box, check your futaba condition. I had similar issues, but is was my yaw settings. When I flipped my mode, Man/ATTI/GPS, my conditions was set differently... each condition (IDLE1, IDLE2, IDLE3, Normal) would have different settings. Reference Page 39 in...

Well, with just 2 6000mah packs about 200ft up, I accidentally took throttle below 10% and it killed all props.. it was sideways, when I started the motor and was about 40% throttle and it recovered. I am sure there were more then normal G's put on those arms. It did not break.. now I want...

Can you post a picture of the hole you have in the bottom?

Any body tried the Apex LDP706.. it comes with built in lipo already. http://www.amazon.com/Apex-Digital-LDP706-Portable-Battery/dp/B003IQM1QY KS

Amen to that...! Just when I am starting to enjoy this.. hard enough time to avoid conversation with spectators about "a hovering thing with camera" conversation. there is always someone asking "can you spy on your neighbors".. question or "can it carry weapons"?.. etc. Until I say something...

well, I had a different experience that got me thinking.... I was up about 200ft, and I started it down, but for some reason, I was in a hurry to get it down faster, so I kept bringing the throttle down, down, down, pass the 10% and somewhere high, you can see all the motors quit, it just...

I don't normally read manuals before diving in, but I was able to read since all my parts was not available.. in reading: http://www.dji-innovations.com/products/spreading-wings-s800/specifications/ the 6S was mentions there and also in the manual here: Didn't really have the desire to short...

with all the post about the S800 arms vibrating, has anyone done any custom work on their S800 frame to stiffen it up or something? I am thinking of wrapping a sheet of carbon fiber around the arms all the way out around the ESC. wondering if anyone has done similar? is it worth it or not...

I use digital trim on my Futaba for the POI roll.. it keeps a constant slow roll.. :) I really makes everyone thinks I have good coordination even when I have a drink in my other hand. :)

me 2.. the manual and the web specs, calls for 6s. KS