Search results

That makes me a top videographer then. :-)

I use a 7.4v UBEC so the wiring stays connected all the time but I would agree that if you are using a Lipo a switch or connector which can't be put wrong way be used to prevent accidents

It all depends what you need or want it for. The one I posted is perfect for rough and ready. The quality pics are on the camera SD card and not on the DVR. I have two one works with my ImmersionRC TX and the other with my unbranded TX. They are separate from my 7' monitor mounted on my TX...

I don't know about a fuse but found this thread http://www.rcgroups.com/forums/showthread.php?t=1901828&page=3 where they discuss the similar issues. I also found these people: http://brushlessgimbal.de/ http://www.iflight-rc.com/ http://fpv-community.de/

When you plugged it in backwards was there a tell tale smell of burning components.... ? If there was I would suspect that something in the board has blown. I am not sure if there is voltage protection on these boards. Bear in mind that thousands of us use these Martinez boards in lots of...

This could be your answer if you want quick and dirty. However, be careful getting the same frequencies as your existing system as, I believe, there are 3 different band standards. http://www.hobbyking.com/hobbyking/store/__19557__Boscam_5_8G_Pocket_FPV_Ground_Station_with_DVR.html

I must admit that when I first looked at the board I never questioned the voltage but now having done a little more research the voltage for all Arduino boards are 3.3v - 5v but this board is recommended to use 7.4v? Although Rob (from AeroXcaraft did say that the voltage can be increased but...

Brilliant... I may be inspired to start a website 'DJI Inspired Crashes' People can upload their videos and 'may' get a prize for the best shots while I sell the pics around the world....

I didn't miss the point.. and I won't be entering either. My work is mine unless somene pays fully for it.

There is no problem flying in the rain but it will put the risk of electrical failure higher. Here in the UK you sometimes have to fly in the rain because that is all we get....:highly_amused: As for the way it pitched it looks like your machine either lost power to one motor or just didn't...

T-Motors are now releasing their DJI motors under their own name now - http://www.rctigermotor.com/show.php?contentid=200 My experience of T-Motors is all good... My experience with DJI motors is mixed with the bottom sir-clip coming off on 2 motors. However, have never ever had a motor over...

Thanks Explorocam, Check your in box.

You are absolutely right no one has to submit work, but you are giving your right to use the footage yourself too. As China has no copyright law they can steal and distribute your work anyway but this time they are asking you to give it up free and use it any way they want without compensation...

A bit like customer support - Sell and Forget......

Apparently firmware 5.22 has a flaw in it, now that will be new for DJI, where the manually engaged RTH will not work. However, I know low voltage RTH still works because it did that to me 2 days ago. Apparently it will be corrected in the next update.

No they want cheap copyright - ie. they want your work for virtually nothing...

What they have done is not legal but like lots of us we expect people to take stock shots like that and re-use them. It would just have been nice if they had given you credit for the shots. However, Legally they should have asked permission first and you could have either refused or offered...

Just showing the AeroXcraft Brushless Gimbal at work and the first Way-Point flight with my Xaircraft X660 Pro.

I met Curtis in the 80s in the UK and he was brilliant and when he and Colin Bliss put on a demo flight for us all I was gob-smacked and inspired but never got anywhere near either of their skill levels... somewhere I have it on VHS tape I just wish I knew where because there is almost none on...

You could also try Buzzflyer, although not in the Midlands they post stuff out over night so order today get it my mid-day tomorrow. They will also demo a rig you buy from them in the field right behind their unit. John and Harvey are always helpful on the phone too. If you are asking for demo...