Search results

man this vulcan board is 10 times more expencive than HK? Is it HK really that bad?

you where right! I dont know it listed automaticly from calculator, I didnt check... Ok here is updated blades and I put 4569g full weight incl. drive weight so it doesnt matter bateries weight because they are already calculated at full weight. Blades are 1575 carbon fiber. -motors -props...

man I am procrastinating my quad... so I ordered my frame and couple more stuff so I will improvise in move, my work is hard so I didnt had time past months to made my first drone. Ok this is my configuration at the moment. My only problem is hover throttle how to fix it under 55% I tried with...

It depends from person to person. For me 30 second is not enough. I need steady video clips 2-5 min.,so 20 min. in hover minimum but that cost. Anyway I dont want to replace batteries every minute plus I dont have money for multiple batteries :D At this moment I am thinking to invest my money in...

Try 700-800 KV motor, and experiment with different blades and pitch.

I tested (in calculator) all motors from 300 to 400 KV in this price range with 1347 props, best is this one. But I found out that if I switch bigger props flight time is bigger off course because it is low KV motor. Anyway, automaticly I need to change frame, and bigger frame more money :D So I...

It is very difficult (al least for me) to have big flight time and to stay in low budget... I think main problem all multirotors is flight time. Do you have minimum flight time?

I don't have expirience to build my own. Maybe some time later, but good gimbal to me is must have. But flight time is minimal on this configuration.

heheh tell me about that :D I am thinking to take your configuration :D my is over 1000 euros :D

Only thing I would go different is gimbal 3 axis, price is bigger but filming is better. And this is why

Nop I would rather build my own.

Inspired by your inspire by Inspire I create my Inspire :D

Ok after first fail, now time is for second :) So my needs are minimum 20 minutes of flight with Hero 4 and gimbal in 3 ways. here is my configuration, way out of budget, so now I will try to have same caracteristics with cheaper parts because this chinese Tmotors are overpriced...

Yep I know it is inspire by inspire... anyway it fits my needs, half hour of flight and go pro 3 way axis... I am in technical problems now how to prepare everything :) Do you know what is minimal gap between two props?

I was looking Tarot but I am not sure because distance from motor to motor, if it is too small than I can't use big props like 14 or 15, can you remember distance from motor to motor? Also minimal gap between two close props is? I just calculated, if I use 14' props with gap of 1 cm between and...

And can you write specs, I cant find this frame, I found similar tarot but I am not sure about size?

This is what am I looking for :D But A2 is over my budget! So how much this cost you (without A2) and is it possible to have same controlls and Carefree Mode with Naza v2? I will copy this project if you dont have problem with it ( I will use different blades and motor and color xD) :D

I am not going with this configuration, too small frame for propelers and motors for weight, I want minimum 20 minutes in air with gopro and gimbal in 3 ways , and after two days of calculating, I think I am going with lower kv motor with bigger props so that means bigger frame... Anyway where...

pheeee :DDD main word deposit xD I was blind after I read 1000$ :D of course if it is too good to be truth than probably it is :DDD

Ok I am building my QAUDRICOPTER and as I can see it will be way ovrer 1000$. This professional HEXACOPTER cost 1000$. So my question is simple. Is it better to buy this "better" hexacopter???! Or this is a scam?!