Search results

  1. Pumpkinguy

    Giovanni Aerial Video - Naples, Florida

    I agree with sleepy. Great work. So beautiful.
  2. Pumpkinguy

    New Release: Connex HD Video Downlink 3000FT $1599.

    I'm using the a2 reciever with 14sg and spektrum to control movi.
  3. Pumpkinguy

    New Release: Connex HD Video Downlink 3000FT $1599.

    The majority of guys use two x 2.4 whether it be 2 futabas, or a mix of brands.
  4. Pumpkinguy

    My experience with screw type Quick Release Prop Adaptors:-

    To update this thread. The drones vision and foxtech came from the same unknown maker. The old design is now sold out and it has been replaced with the newer version. I ordered some because I needed more "top halfs" the side that goes on the prop. Even with the extra holes it is...
  5. Pumpkinguy

    Problems with too much power?

    Liability is an absolute must and is very reasonably priced. Rental and comprehensive insurance on the other hand is not cheap but cheaper that buying a new m10. Lol.
  6. Pumpkinguy

    1100mm hex build. Hexacrafter, T-Motor, A2. Oh my.

    Brain fart. I am only posting it because I hope someone will learn from my mistake. Was about to launch. Forgot to put into atti. Went to take off in gps and she tipped over. Landed on one prop. Not hard but enough to bend the motor shaft so the stator is rubbing on a magnet. If you...
  7. Pumpkinguy

    Problems with too much power?

    Exactly my thoughts. Any major city will have rentals. I know I can get the m10 or 15 for a couple hundred a day here in Toronto.
  8. Pumpkinguy

    Problems with too much power?

    I can tell you that my flat hex (1100mm) with u7/490 I can easily take the weight of a stripped down red and lens with 17" props and gh4 with 16" props. No crazy hot motors or esc's at full load and very cool with gh4 and movi m5. I think if you go with tmotor my heatsink mod is worth...
  9. Pumpkinguy

    Tips on replacing the bearings of my Motors QC-3328

    Don't buy into the hype of ceramic bearings. Replace with original or equivelent.
  10. Pumpkinguy

    Tips on replacing the bearings of my Motors QC-3328

    I did this vid a while back. Cheers.
  11. Pumpkinguy

    What did you do in your workshop last night?

    I replaced a U7 motor because of my own stupidity. Lol.
  12. Pumpkinguy

    As150 connector users please chime in

    I am currently using the castle 6.5mm connectors for my big rig. They are rated for 200amps. FYI, I run a 2 battery setup and each battery connects directly to the power bar. So basically 3 motors (U7) drawing from each connector. I hate how the castles spark and look like crap after a...
  13. Pumpkinguy

    HobbyKing goes "Pro" with the DYS D800 X8 HL Copter.

    http://www.fpvone.com carries them as well. Located in the USA and I can assure you the service will be better than from HK. @FPVOne
  14. Pumpkinguy

    OK, WTF!

    Buddy I feel really bad for you. We can deal with crashes but injuries are not cool. That is a minor injury compared to what could have happened. Consider yourself lucky. You need a bit of a ***** slap as well for not taking the props off after the first episode. WTF! In my...
  15. Pumpkinguy

    Windows 10

    I will get windows 10 when windows 12 comes out
  16. Pumpkinguy

    Windows 10

    What happened to windows 9? Lol
  17. Pumpkinguy

    Panasonic G7 Arrived

    @Giovanni59 Here are the ones I got from goodluckbuy.com I made all 3 immersion ready. Direct plug n play. All 3 worked with the gh4 tonite when I tested them. The switch position doesn't seem to make a difference. With ntsc anyway. That's probably why my kopterworx version had the...
  18. Pumpkinguy

    WKM Crash at takeoff

    When it does I have the part replaced
  19. Pumpkinguy

    WKM Crash at takeoff

    Is sure sounds like you are crediting thw issue to the FC. ;)
Top