Search results

  1. fltundra

    Gongrats to Aerial MOB and Mr. Kloner......well done

    Here where i am the knowledge i gained going from 15 years RC fixed wing and then to getting my single land and sea ticket and now to VTOL . To fly safely here we have spray planes that can fly anytime at altitudes lower then 400 feet. So before i even think of flying, i go threw all the Notams...
  2. fltundra

    Heavy lift rig for Red Epic

    Like I've said , my experience with Tiger bearings going bad, was not good at 10 hours. I was pissed that less then a month i had to shell out a bunch more money, but know now, it was the smartest and safest thing i could have done. They are the Rolex of motors. Just don't want to see you lose...
  3. fltundra

    Heavy lift rig for Red Epic

    Take a look at this thread. http://www.multirotorforums.com/showthread.php?20172-KDE-XF-esc-s
  4. fltundra

    Heavy lift rig for Red Epic

    Funny noises and a bad bearing from the get go. Trust me, you don't want to risk it!
  5. fltundra

    KDE XF esc's

    Another bit of info:
  6. fltundra

    KDE XF esc's

    All in one ESC's. Board fails, bird hits ground. 8 single, one fails, bird lands safely. https://www.facebook.com/herkules3.de?_fb_noscript=1
  7. fltundra

    FAA attempts to ban FPV Goggles

    It's called Telemetry.:tennis:
  8. fltundra

    KDE XF esc's

    I'd like to see your tests with a KDE motor.:tennis:
  9. fltundra

    KDE XF esc's

    All were tiger?
  10. fltundra

    KDE XF esc's

    I ran my tee knee tiny castle 25's last nite at 11 amps continuously 83% on the FC, and never saw more then 95 degrees with my 515kv's on a 4S.
  11. fltundra

    KDE XF esc's

    I think the motors are the problem, not the esc's. Maybe internal resistance increases drastically with temperature or just a bad design.
  12. fltundra

    KDE XF esc's

    What voltage were you running? 16 amps at 65% on a 6S is not a lot for the listed esc's,
  13. fltundra

    KDE XF esc's

    Never really worried about it after reading this and speaking with Castle when i was doing my research.:)
  14. fltundra

    KDE XF esc's

    Kloner, have you tried changing the esc setting in the SuperX? 333hz standard.
  15. fltundra

    KDE XF esc's

    Looking forward to your flight results!
  16. fltundra

    Well...It Crashed! Tarot 650

    I don't discharge more then 80% ever, or no less then 3.6 volts under load. I fly my 8000mah packs to 6000 mah occasionally, 5000 mah on a regular basis on the Unisens-E readings, and it's always within a few percent for ma back in with my cellpro charger. It's a perfect combination to monitor...
  17. fltundra

    Well...It Crashed! Tarot 650

    What radio system are you using? Telemetry is the only way to fly now. Unisens-E and the Frsky lipo sensor, wouldn't fly anything of value without both. pack volts, cell volts, watts, current, mah used, height, rpm, and alarms galore with the Taranis.
  18. fltundra

    XAircraft SuperX - Taranis - X8R

    I think your right! was just thinking the same thing:)
Top