Search results

  1. fltundra

    XAircraft SuperX

    Futaba standard of 1100us to 1900us, centered around a 1520us pulse width.
  2. fltundra

    XAircraft SuperX

    Have you tried plugging them directly to the receiver?
  3. fltundra

    XAircraft SuperX

    "Fast Red flashing" System error: module communication failure or RC signal incorrect. http://www.multirotorforums.com/showthread.php?22043-KDE-Direct-XF-UAS-ESC-and-Flight-Controller-Compatibility-List
  4. fltundra

    What's your voltage drop?

    This lipo calculator gives you voltage drop at different IR and C ratings. http://www.soko-heli-tools.com/en/lipo-battery-calculator/lipo-battery-calculator.html
  5. fltundra

    First A$$ View

    Congratulations!
  6. fltundra

    Tiger Motors 4114-9 400 - problems

    As I understand, only the T-motor esc's will work with those motors. Many have had the same issues. Maybe someone with your motors will chime in.
  7. fltundra

    Tiger Motors 4114-9 400 - problems

    Motor sync issues! Are you using the matching T-motor escs?
  8. fltundra

    WHO GOT ONE?!? GoPRO 4K Black

    DYS 3 axis.. Going with the phobotic controller when they ship the next run on the 12th. The green flash you saw was my nav liights, Strobons.
  9. fltundra

    WHO GOT ONE?!? GoPRO 4K Black

    4 black is 13 grams heavier then my 3+ black.
  10. fltundra

    XAircraft SuperX

    Are you referring to the connections to the SuperX? If so, only had to remove + FC connections and tie them together, because when I purchased them the quad pack came with 3 with no bec's and one with. Castle since changed where can purchase singles with or without bec's. The way they do it...
  11. fltundra

    XAircraft SuperX

    I know I'm beating a dead horse, but I've had no issues with the Castle 25's and the KDE 515's and I did'nt have to change any endpoints (-100 to +100) to calibrate with the Taranis or the SuperX. Done extensive testing with IR thermo , and they never run more then 10 degrees f more then ambient...
  12. fltundra

    WHO GOT ONE?!? GoPRO 4K Black

    Protune off, auto low light off, no post prosessing other then cropping. Ran out of time to test but want to try 2.7k at 48fps, probably what I'll use mostly. 4k is alot of bandwith even with a I7 quad core mac. So far happy going from the 3+, think there will be more improvement after I play...
  13. fltundra

    WHO GOT ONE?!? GoPRO 4K Black

    No phobotic controller here yet, but here you go. https://www.youtube.com/watch?v=z1QRZ2mFtms
  14. fltundra

    WHO GOT ONE?!? GoPRO 4K Black

    Definitely heavier on the on the right looking from the back. Getting ready to do a sunset flight test here in a few.
  15. fltundra

    XAircraft SuperX

    Have the 3+, was lucky it didn't have the focus issue. Yes the 499 version, 4 silver is almost identical to the 3+ with the addition of the lcd touch screen.
  16. fltundra

    XAircraft SuperX

    Will do, had to charge her up and my son's shooting some test footage now. Too windy to fly, maybe tonight. Don't know if you have seen the demo in 4k, pretty impressive! https://www.youtube.com/watch?v=wTcNtgA6gHs
  17. fltundra

    XAircraft SuperX

    That sucks, blowing 15 to 20 knots here. Picked up the Gopro 4 this morning, bummer.
  18. fltundra

    XAircraft XCope & 10A ESCs?

    Personally, i would like to see at least 12amp esc's. But i think you will be fine.
  19. fltundra

    Need to acuire a new controller. Go for WKM or A2?

    I followed Kloner's advice over 6 months ago, and very happy i did. No issues, doesn't fly away, rock solid gps, and also fantastic in manual mode. Logs are invaluable for tuning... Simply, it just works like it's supposed too!
Top