Search results

I agree. I would be very surprised if the DJI props are anywhere near that price. I'm only asking because I would not want to be tied into one style/make of prop.

They look reasonable. Have you checked that your yaw stick is centred in the TX calibration page? How about trying your GPS mounted behind and directly in line with the IMU. I'm sure it will not make any difference, but that's where I have mine and no yaw issues. I see you have your Hex in X...

Out of interest. What are your X, Y and Z measurements.

HI BorisS LOL. 199 euros for 4 props. That's exactly why I liked to know if DJI motors will be able to take other props. I assume the motor has a shaft and it will be just a case of replacing with a longer shaft.

@DJI INNOVATIONS. I see the carbon props are screwed to the motors. Will the motors have an adaptor or shaft for mounting other props? Cheers

I have not heard of the F1 system. A link please to see the on board footage from this F1.

That should work fine. I had to adjust my subtrim on the assigned switch. No soldering needed.

I have mine on a two position switch. Toggle the switch to take a pic or flip the switch and it will take a pic every few seconds.

I recently bought one of these shutter IR for my nex5n. Works perfect. http://www.gentles.ltd.uk/gentled/shutter-zoom.htm

Hi meme. What an amazing location you live in. I worked in the Dolomites 20 years ago on a film called Cliffhanger and was amazed by its beauty. One of these days I will re visit. :-))

OK cool. I only mentioned it as the one click on the ratchet style is a massive difference in height.

Hi Zzr. Does your throttle stick have a smooth feel or is it a ratchet/notchy action.?

Hi anaka. Excellent results. What customisation have you done to the AV 130 gimbal.?

Pic of a standard install. A good start would be to make sure your IMU is dead center of the quad.

Give Graeme at quad frames a shout. I'm not sure if he cuts CF. http://www.quadframes.co.uk/

Jeff Scholl has mentioned he uses Mercalli to take the edge off his vids.

Thanks for the link, but I wanted to see footage from the gimbal, not of it. You are right, I want to see vids from a paying customer, that's why I asked BorisS

Do you have any on board footage from this Gimbal?

That is exactly how I did my Z axis. On my first set up I balanced it on the edge of a steel rule. Now my esc's are strapped to the landing gear, so now if I make any major weight change I just check by balancing it on my finger tips.

See ya. Don't worry, I will close the door behind me..