Search results

Bugilt thanks so much for your input ;-) with a quick google search i have seen that this dd-wrt is a firmware that must be loaded onto a standard router?! it is right? need some more research to understand how to...

in my opinion the only interesting things is the wifi extender.... is a long time i'm looking for a 12V wifi extender and never found one

ferdinand your work are really clean and nice ;-) i have a question for you: i will like to make another x8 but will like to save some bucks on the motors and will like to know your opinion on the last setup you've used Motors: Tunergy Multistar 4225 610KV Props: Graupner 14x8 ESCs: Hobbywing...

uau!!! even if will be nice to know something more than only the batteries ;-)

just buy and easy connect an rc/switch it is a little device that you can connect to one free channel of your receiver and by programming your transmitter you can switch on and off any kind of little device and or leds. hope this will help

nice ;-) but please use a vacuum cleaner while cut the CF !!! the powder if really dangerous for you first and for the machine

yes i have one... controlled by sms from my phone and it sent me the coordinates , never used but is nice to have.

:nevreness:i've never broke one ... simply i haven't mount it:tennis:

so come and get it for free!!! plus one "granita" and "cannolo" if come again here just let me know, will be nice to meet friend with same hobby ;-) where do you live?

no god ;-) if you want i have a spare plate upper and lower , even if i think that the postage to you will be more expensive than to buy it locally

if you need only the carbon rod you can have a look at the hobby shop that sell kites for less than 2 euros you can buy one meters of rod ;-)

i'm not able to upgrade one of the two naza i own.... tried a lots of time but nothing.... nothing !!! each time i connect it to the PC , run the assistant and open the upgrade info page; after this it start to download and stop at 1%. in the same time i have seen that this disconnect my...

i'm sure that this is the reason ;-):nevreness: http://www.multirotorforums.com/showthread.php?13810-Important-hackers-are-very-active-lately Bartman had to reset all password for our safety

in my opinion... folding is a nice feature but i think that move-move-move and again move cable that are into the boom is not a good think.

read read read and again read the naza manuals ;-) all is explained and only by read more than one time user can understand the right road to follow :nevreness:

i use aurora 9 with my MR, simply set the ACRO "plane" mode and you can go on the assistant and check all the parameters. the radio must be set as standard , no epa on the 4 channel, the only program you had to do is to assign to your favourite switch on the radio the x1 x2 and u of the naza to...

really nice frame!!! can i ask you with wich 3d printer you have done it? it seems to have a nice and clean finish... also, regard the derlin , i play a lot with it on my little cnc machine and i always have found it really strong, probably in my opinion there are a problems with the drawing of...

done the upgrade on my naza v1 with x8 setup, yesterday all seems well during one fly test... today i have noticed some problems, while i'm in gps with full satellites the Mr give me a shake on roll axis and after this i have noticed a strange led sequence, i i well remember (after roll shake my...

just complete my X8 quad and will like to replace my apc SF 12x3.8 propeller with wood prop, have found this and seems nice, you guy what do you think? anyone use them? my setup 2 x 4s lipo 4000mha 8 dji 30a esc 8 mt 2814-10 770kw motor any advice will be very apreciated peppe

nobody can help?