Search results

this is a quick video of me taking my copter up to about 200ft, its vid right out of the camera. I did not start getting up until about 40 seconds in, however there is a few small tree swooping over shots before. cheers all Jack

I do have a few battery questions. When I got done with my first 14.8v flight I found the battery warmer then my 11.1, along with my ESC's. One of my ESC's were even a little warmer then the others, nothing I could not leave a finger, it was still warm, just a little warmer. I know I am using...

I am thinking to about seeing what my copter will do if I move up to a 14.8 lipo, currently I am using a 11.1 and I have the thresholds dialed in to 10.3 final and 10.45 warning. I am wondering what would be a good start on the numbers if I moved up to a 14.8, thanks for you help ahead of...

I know in the past I have read some issue with Attitude warning with the 4.22 release. I am wondering if people are still seeing some of those issues. I believe it may be something happening here on my craft. Until I downloaded the newest the release the other day everything has seemed to be OK...

if you lose a motor in flight with the others cover for it until you get down to the ground.

I guess can say I am just finishing up my first flying, testing of a quad. Not knowing much going into it, and still not knowing a lot to say. I can say I am fairly happy with the results. I am in the midst of thinking about building another copter and I am starting to wonder if I should look...

This is a shout out for our Russian friends best wishes for your cause whatever they may be. I saw this posting up on yahoo and thought it would be a fun thing to pass along to our little group here on the web...

I am wondering, when I went onto the XaircraftUSA site the first thing there is a note talking about not holding calibration, which I have seen many times from my end. just wondering

Is anyone out there getting vibration in their xaircraft camera mounts, I just build cm130 when I attached it to my copter the first thing I see is the vibration in the video. I know that is somehow coming from the copter but its flying well. I am trying to figure out how know the vibration out...

I have a camera mount that I am having exessive vibration which is showing up in video. I am wondering if there is some quick solutions out there. I am thinking of making a type of vibration mount. I have seen some doing it with silicon tubing and somehow mounting them to a bolt. I am...

I am trying to figure out if they are to big, the thought process it to increase flight time by I am wondering if the vortexes are getting to close together.

If so I would like to hear, also are they worth it, if so where may you get one for the US thanks in advance Jack

I am looking for a little help, on my quad copter I am trying to figure out my x offset number for the GPS placement. My quad is in an x fashion, so with that said if my gps is 7 cm behind the CG point would the x number be a -X (negative) or X (positive) number. The way I would think of it...

I have my quad, xaircraft frame, wk-m, avroto 2814, apc 11.4.5 props, and 6600mAh thunder power battery. It weighing in at 2380g and, I am currently getting right around 11 and half min before it hits its first battery threshold (10.45V), if I let it go I can get somewhere around 12:15 to 12:30...

I am trying to figure a simple lightweight, video downlink for my Qaudcopter. No knowing good ways of doing this I am looking for any information/advice out there. I am toying with an IP camera but understand it will run on a 2.4G freq. I am not sure if that would be wise since I have a...

Does anyone have any information on the mounts, I am wondering how much tilt angle, weight in grams, and vibration. Please weigh in

rwilabee - put up a posting last week about basic gain setting and as I read through it I started wondering what people are doing on their end. Please chime in, I look forward in hearing about it. thanks you Jack

Just curious, I am trying to get myself into the ball park so I can set myself self up to be safe while getting the max out of my flying. Currently I am at 10.65 on the first and 10.4 for self landing, not sure if that is good, bad, or somewhere in between. Cheers all

I am hear to listen and be educated, overall I would like redundancy, keeping it as a octo, but I am not totally against going down to a quad, I just don't know enough about motors and esc readabilities, so if one fails in flight I would like to have a safety cushion. I thought of going with the...

Fail safe question This has nothing to do with my previous crash post, I am looking for a little better explanation of how the failsafe function works on the WK-M. I programmed the fail safe option to a switch, so I could test it out and see what it does. I was flying my quad at about 6 feet...