Search results

90 would be 9 seconds. 9 would .9 seconds.

CRCR the 247 is in increments of .1 so 247 is 24.7 seconds. There are also 12 'serial channels' that can be setup. I've never used that function but if you have a 16 channel radio and are using s-bus it should work. See section 3 at http://www.mkmanual.com/mikrokopter-tool.

Glad you got it filmed before the blizzard. Let's hope it doesn't get bumped due to the storm. Maybe someone can capture it to YouTube so that it can be used more widely.

Helloman unfortunately the feds would disagree with you on who owns the airspace and in what amounts above your property (Also, legally, you own all the airspace above your property to infinity there is no limit.). And without a doubt they regulate it. From an analysis by the Aircraft Owners...

If you weren't military go fire a machine gun at one of the indoor ranges. Grab a helicopter ride over the strip or out to the Grand Canyon. Ride the roller coaster on the top of the Stratosphere. More sedate, check out the view from the Eiffel tower at night. Like great photography check...

Terry why not call our aircraft what they are. Multi-copter, Quadro-copter even helicopter. Drone is a correct term but the connotation has taken on the proportions of calling a semi-automatic rifle an 'assault weapon'. I'm guessing that while shooting pictures you have never programmed in a...

So there is good news. This was a 'resolution', not a law. you can read the text at https://www.rutherford.org/files_images/general/01-21-2013_Drone_Exclusion_Resolution_Charlottesville.pdf. Rutherford Institute is the ones who drove this with the help of one of the council members according...

Kloner the Castle Ice ESC's only log until the buffer is full then stop logging. Never did understand why they don't make it overwrite when it is full. I know of several folks using the ICE 50's with the configuration as outlined in the HF post above. Sounds like it was a bit of a home brew...

First thing to check is the card. GP support will ask you that first off and if you aren't using one of the three cards the suggest, well lets say the interest goes down until you get it fixed. Sandisk or Kingston Class 10 cards. I don't remember what the 3rd one was. And yeah they are very...

Also consider these clamps: http://www.quadrocopter.com/Metal-Frame-Clamps_p_806.html http://www.quadrocopter.com/Metal-Shaft-Clamps_p_807.html First ones help with the roll bar slipping, the second clamp to the tilt bar.

Quacker saw this posted on helifreak also and he said he was in Lamar, CO. Also posted at http://www.wattflyer.com/forums/showthread.php?p=898629#post898629

Rory I don't know the WKM products but if that is what they are suggesting it is similar to the HFPro line. On the HF you connect one of the ESC connections with power and the remainder without.

Rather than cutting it, which is a bit permeant, just extract that pin out of the 1x3 BEC housing, bend it back and cover it with electrical tape. That way you can easily restore it if you need to.

Does anyone have the definitions for the various columns in the HF Flight log? Most of them make sense but a few are throwing me off. Here's the ones I am confused on (these are the Column Headings): P, R, GPSP, GPSR, xRMS, yRMS, zRMS, DCyc, GyT, DB, ALyc

I asked HF about this and the answer I got was they got some reports of problems early on and found that by only connecting one BEC the issue went away. So it sounds like a best practice where it just depends....

Ben have you tried them on your CS8?

Kloner. I have it set to 17, CS8 copter, on my MX-20, forget what it actually shows in the software. Turn it on and don't increase/decrease throttle and it holds. I forget whether a throttle re-position changes it but I think it does. I did put a piece a piece of foam over the pressure...

Trying to visualize where these would be installed. Look forward to a photo of installation.

Boris try these at MSC http://www1.mscdirect.com/cgi/NNSRIT2?PMAKA=82141995&PMPXNO=20232780&cm_re=ItemDetail-_-ResultListing-_-SearchResults Just measured one of them and these look darn close.

Bart the stick calibration is in the MX-20. Not familiar with the JR's but maybe they have something similar. Basically you go through a full series of stick deflections and the MX-20 'calibrates' to those full positions.