Search results

Hi Benjamin, Thank you very much for the reply, is it safe in assuming that you guys plan a shot and then setup the camera for that shot only and so forth? I can see that working, but I'm trying to figure out what will work best if you don't have time to land and you have to do a shot that...

That is the question.. What settings do you guys use. I recently did some flying where I just filmed a MTB race just for fun, I set the camera up in "M" mode, adjusted my shutter speed, aperture, iso and white balance to the best of my ability not to over saturate the image. Then while...

Good luck Droider, I know you will come back stronger than ever.

Hi CJ, Will you settle for $450 for both and still include the worldwide shipping? Regards, Andre

Yip, I named mine, "Late Night Liz" I think it is pretty self explanatory.

Hi rich, it is definitely going to give you more flight time.

Hi Guys, Here is another clip which was shot by the Up in the Air Media guys here in Sunny SA, they are using the Cinestar with Hoverfly Technology and it seems like they are absolutely loving it. The event they filmed is a Navigation race where you are only allowed to use a compass and a...

Hi Gavin, I look forward to seeing the results you come up with. Where did you purchase the Tiger 3515 400kv motors? They seem pretty good, but I'd like to do a little bit more research. Regards, Andre

Hi Gavin, That is truly interesting. Can you tell me what size props you did the test with and also how exactly you conducted it. Did you run full throtle during these tests? As mentioned previously I got 1kg of thrust on a APC12x3.8" SF prop, must admit I did not test the current bu the motor...

Hi all, thought I would quickly join this post and ask a question that has been on my mind for a little while. Would I be able to use the new Beta released firmware to run my Cinestar 360 Gimbal with the potentiometers being bypassed? I tried this a while ago not knowing that the board does not...

Hi Gavin, Currently I only fly 1 x 4cell packs, 5000 mah. I stop flying at 4 min's that equates to about 80% of my battery capacity. Must tell you though I flew today and the motors got hot again but I suspect my gains are too high as I adjusted them for windy conditions on my last flight. So...

Hi Gavin, I also run a hex with AXI 2814/22 motors, TOW on my setup is about 5.5kg. I can tell you one thing you are over propping your motors, I use to run APC slow fly 14 x 4.7" and the motors got so hot that I could not even touch them. This is using a 4 cell battery. I then started doing...

Up in the Air Media was in Tulbagh, South Africa and this is a clip of what they did there... Enjoy.. Cheers.....

Never been to Southern France but I'm sure the scenery is just as amazing. We are using a GH2 and all LOS

Hi Guys, this was shot with a complete Hoverfly System on a Cinestar.

Those look awesome! May I ask how you managed to take the pictures straight up? Regards, Andre

OK that explains the lagging, so back to pots it is for now. I'm really looking forward to the solution though I think it will make gimbals much better than they are now, and they are pretty good already. Thanks for the good work guys, really glad I went with Hoverfly! Andre

Make sure your gains are not set too high. Also where did you mount the HF Gimbal board?

Hi Guys, OK we have been having some bad weather so I thought I would try and modify my CS 360 gimbal with all continuous rotation servos by bypassing the pots. Problem is I can not get it to work properly for some reason, I get a lot of jitters when my Gains are too high on the roll and tilt...

Hi Ben, I've been following your work and I must compliment you on the quality of the shots, really incredible. I'm trying to start up a Company in Cape Town, South Africa that does low level aerial photography and I was hoping you could give me some advice with regards to how much you...