Search results

9 minute test flight complete. It was the Deans. Thanks for all the help.

about $1,000.00 why do you ask?

I got to the bottom of it. Seems that one of the male Deans connector on the parallel cable is not fitting tightly into one of my batteries. After putting a little solder on the tab that provided a tighter fit I got a 9 minute flight in. It was just hovering but it was the longest one I got so...

So I did 2 flights today. I ran 2 batteries. One 2500mah and one 2800mah. With a 0.90v loss setting it flew for just over a minute. I then checked the volts of the batteries with a multimeter. The 2800mah had 12.3v and the 2500mah had 10.4ish. It makes me believe that the problem is with the...

I will check that out voltage tomorrow. The funny thing about this situation is that my 1st Storm 6 did the same thing. Helipal sent me an entire new Storm 6 and I shipped the 1st one back. The only part that I kept form the 1st one was the GPS antenna. I don't know if I can have a defective...

Protection switch ON 1st level No Load 10.90v Loss 0.50v Loaded 10.40v 2nd level No Load 10.30v Loss 0.50v Loaded 9.80v

I changed it to 0.40v and it still didnt fly but 10 seconds on to full lipos 2500mah and 2800mah. Could my GPS antenna be bad?

do you mean 0.40 or 4.0? the software wont let me input 4.0

I will try that. Thank you.

I am hoping someone can help. I just got my 3rd drone and am having a problem with flight times. Its a Storm 6 Hexacopter and I am using 2 2500mah 3s batteries. I start to fly and the LED flashes red after a minute and I have to land. When I put the batteries back on the charger and...