Jfro - nice write up! Quick question re the sbus input, are you able to assign any of the sbus channels on your radio receiver or are you limited to the first 4 or the second 4 or the first 8 or last 8 etc? I'm curious and want to confirm that any of the sbus channels can be assigned.
Cheers
Hi all,
Just wanted to talk about a prototype product that will allow simultaneous operation of two sbus devices that both use channels 1 to 8.
A number of people have said that in order to control a flight controller (eg working) and a dedicated gimbal there is a problem because the sbus...
I'm using 2.5 firmware now but I'm pretty sure that the GUI for your version has an expanded page in the RC control tab - just scroll down and you should see it
Hi cootertwo, I've been flying for years now and playing about with FPV almost 4 years now so I've had my fair share of "incidents" and many lessons learnt! I have a friend of mine that makes my cloverleaf and skew planner antennas (I only use the skews on both the vtx and vrx now). He's...
Hi Cootertwo, thanks for the comments - I'm using immersion 600mw with skew planner antennas on both the vtx and vrx, good for 2km + no issue at all (not that I fly that far, it just ensures good connection and no video loss!).
Many of the older 8 bit boards were susceptible to over voltage issues and could fail. You ought to look at the latest v3 32bit boards, they are much better and use the latest and greatest firmware/GUI's. Take a look here...
What spektrum receiver are you using - not all support a programmed failsafe where you can pre set the throttle position when power is lost to the receiver. You need to check that your receiver is set up properly for the failsafe to work. When configured you must check it by connecting to the...