Recent content by unknownid

I have tried plugging directly into X3 as well as CH 11 to my RX to try and get landing gear to work with no luck..

Has anyone here successfully gotten their landing gear working with a taranis that can explain how? I have an s900 and s1000 , both WKM. I am tried plugging directly into X3 as well as CH 11 to my RX to try and get landing gear to work with no luck.. I've tried calibrating it, it kind of...

If anyone googles this, three things were changed to fix it, not sure what did it. GPS magnetic declination, had to adjust my gps by 15 degrees (check your location). Remeasured IMU and gps placement. Re made route in ground station. Works fine now.

Im having a bit of an issue with my new S900 and the dji ground station software. First, the S900 seems to toilet bowl very slightly at times as you can see in especially near the end when my boss lets go of the sticks and it starts to bowl. The GPS is pointed straight to the front of the UAV...

It was the profile I used. https://vid.me/8AXu I need to work on my landing and not come in like a bullet haha :)

Negative. My phantom 2 arms in gps and flys no problem.

Ahhh I see. Mine appears to do that properly. I move the switch and each highlights blue from GPS > ATTI > MAN At the bottom of the assistance the mode also updates properly going from GPS Atti > Atti > Manual

This is very helpful thank you and kind of where I thought there was an issue. I am not super familiar with the taranis but I am trying to read as much documentation as possible. This is my channel mixer in Naza. Can you give me a hand or point me in the right direction where I can change the...

Just tried. Armed fine in atti, switched to GPS and it immediately dearmed. Im not sure where i'd find an error code. I've never seen one yet.

Hey guys, I have a Naza V2 with a taranis x9d. I can arm my T810 when its NOT in gps mode no problem (ATTI/Manual). When I put it in GPS mode, I calibrate my compass, I get the green flashing light that it has a signal, but I can't arm. Someone said something about trim values? I cranked this...

thanks! its working :)

naza v2. thanks man, if you can let me know what escs you have too that'd be great,.

Totally seems plausible. I just hear it on the custom build videos I've seen so I worry that I might have done something wrong.

So I had this together first go around and she flipped cause I had a prop on wrong, then I fixed the prop and it still wanted to flip over so I took it all apart and am trying again but I am having the same wonder I had the first two go's at this and that is when I plug the battery in my ESCS...

anyone have any pointers? i dont know what left to try... according to this http://www.falconsekido.com/collections/xrotor-user-manual The motor will emit a long “beep----“1 second after the system is connected to the battery indicating the ESC is armed and the multi-rotor is ready to go. but...