My new F550 was fitted with 8 inch stock props and hovers excellent but the climb out is slowish
I have Graupner 10x5 E props coming running 3S 5800 lipo
I get 10 min flight with the 3S 5800 lipo and 30% left
I also manged to locate some Graupner 9x5 E Props for my DJI Phantom but that decided to fly away this week and was lost.
So I see you are using 9x5 props on your F550
Futaba T8J radio with genuine Sbus Futaba 8ch rx
Some have said it could interfere with the GPS unit?
Can I use a 4S lipo on my stock F550 setup?
I will be using a 3S 5800Mah 30C lipo
Has anyone had any problems using a 1.2Ghz 1 watt fpv style vtx on their F550 with the Naza and GPS?
I have ordered this vtx /rx combo
http://www.infinity-hobby.com/main/product_info.php?cPath=198_228&products_id=7756
I will be using a Low pass filter of course.
You will need to adjust the middle rod so the carbon plates are flush with the outer rollers.
Mine has no gap on the front rollers and little gap on the rear rollers which stops the twisting slop.
I was coming into land and Mr magpie had other ideas
The magpie was not hurt
My 500X was 1 x boom, 3 x landing pole mounts, 2 x Futaba S3156 digital servos on the crane II gimbal were both fried.
Total repair cost was $117 Aus (the futaba servos were $93 of that)...
I am using all the stock ESC and motors for the 500X and the GU-INS controller with GPS
My 500X can reach 5000 feet in under 5 minutes with the 3S 4000Mah 25C lipo
http://www.youtube.com/watch?v=DpifJNfKFvQ
if you have the new Crane 2 Gimbal then it would have come with Futaba S3156 digital servos
Mine work perfectly
Make sure the adjustment rod at the top is set so the roll axis is smooth when moved by hand.
I am going to try it with my Sony 1080P handycam and Sony 720P compact camera.
Just saw the new Sony RX100 and the Sony Action camera that does 720P 120FPS
I am very happy with my Gopro HD 2 at 720P 60FPS with the live feed too but want something without the fisheye.