OK I've got a couple of logs with an explanation if those who understand reading the data can assist with explanations.
The bin file was my last flight with a 3 or so minutes of loiter to assist with looking at the vibration, baro, compass, and any other comments...
If you haven't found the great info here - http://copter.ardupilot.com - looking under instructions, then first time setup in the drop menu you should go read it all. This is very comprehensive information and explains the whole process along with the prompts in the APM programme itself.
You...
I'd really like to be able to upload a couple of logs and have some comment on them, but can't work out how to do same?
Do I need to find a host for the files and link to them within a thread?
Appreciate any advise.
3DR pixhawk & tarot650 build
Can I ask if someone here could help with reading a couple of short flight logs
Reason being, I've over the last doz or so flights tweaked my advanced settings and felt I had my tarot650 flying well, today I tried out the autotune (as u do!) and the settings...
My experience with the Pixhawk.
I used to fly RC about 15 yrs ago and that is the limit of my experience with this modern technology
Living on a small rural block and looking for something that would provide a challenge I became interested in both the flying aspect (I have always had a love...
Thanks for your response, my description was inadequate I did read the referral to the simonK aspect and should have asked if there was a work around as you have suggested. I'm struggling to sort the hay from the chaff somewhat as regards the periphials, can I ask for a recommendation for a non...
Its hard to get any info on this particular sunny sky motor, but I believe it is only 14pole. I haven't be game enough to try the auto tune function as I decided to test the for the motor stall by tethering the quad and advancing and retreating the throttle very rapidly, and it appeared from...
Have built Tarot 650 ironman with the following:
SunnySky X4108S-14 KV480 motors
ZTW Spider 30A opto ESC SimonK program
Gemfan (T-motor type) 16 x 5.5 blades
Zippy 4s 5800mhr battery
SkyFly Taranis X9D & X8R-PCB
End weight 2058gm without gimbal & GoPro
added 274gms of weight to equal gimbal...