Hi Majaribio Long time no hear! How are you getting on with the 500? Since we last communicated the weather has been just appalling until now! I have tried to take it out on the time I have, and I am still struggling. Are you still interested in meeting up and trying to crack it together? I am...
Hi
Thanks for the advise! Its certainly a challenge this isn't it! Not only flying them, but also when they crash how you maintain them also! Trying to fly it after practicing on the SIM was like starting again for me. I really not sure if the SIM actually allowed me to have more control over...
Hi Mark, I can only dream of flying this unit like these videos! At the moment its seems like its never going to get off the ground! I have looked at the manuals with the ESC's and I cannot see how you reset them? Do you mean unplug them all?
Thanks
Hi Geoff, sorry for my ignorance, but what is a 2s Lipo? It does need taming, as I really didn't expect how lively this little unit can be! I have played around with the trimmers on the throttle and Aileron, which seems to help when the units starts in a lower RPM which provides more time to...
Hiya. Thanks for your input. Well its a fully assembled version, so Buzzflyer definitely test flew first before sending it to us. So it can fly, and the props are flying in the correct direction. The wires all seem OK. Not sure what you mean by the GU344 gain? (I am a beginner so its blinding me...
Hello
I am struggling to fly a Gaui 330 XS quad. I have the protection frame on the outside (essential if your a learner) which I am very much! I am having trouble just getting it off the ground. It keeps tilting violently on each side when any throttle is applied. I have at the moment the...
Hi Majaribio I am like yourself struggling at the moment with the 330XS Its like a little animal compared to the SIM and its like starting again! I cannot control the Airleon as kits tilting all the time and bouncing off the ground. I have been told there is a ground effect with it and...
Hi Majaribio
Gosh you are very close :-) OK, well I think it might be a good idea to meet up and try them both! We can swap notes etc! Tip for the SIM, is to add the weight of the mount underneath. Mine can take 700kg I would expect the 500 will probably take a little more. It performs far...
Hi Majaribio Im also in the same boat! :-) I am awaiting my 330XS from Buzzflyer (fully assembled) and I have bought the RC Sim! Just brilliant, it has the 330XS on it, which is good enough for the 500 RTF. We almost went for the 500 however I was a little worried about its camera mount and the...
Hi Lifter. Many thanks for your help on this! That gives us a lot to go on, and I am sure we can make a decision based on your info! :tennis:
People on here have been very helpful indeed, which includes yourself! Good to see how it all fits together with the images, and the legs appear to be...
Hi Lifter. Many thanks again for sending the links. I did look at it before, but I must admit I'm a little confused how its all set up? Would feel more confident if there were some shots included with it all fitted. Are you sure 100 percent they can be fitted to the Gaui 500RTF? Have you seen...
Advise needed for camera mount and legs for Gaui 500 RTF. Wanting to do aerial photography and video, however many of the video's you see on the Gaui 500
show the legs in the shot. The GoPro Hero 2 is very wide angle, and the standard legs and mount on the Gaui are in the shots! Can anyone help...
Hi Lifter
Many thanks for your reply.
We could seriously consider the the 500 RTF but we would need some advise on durable legs and camera mount. We had it all sorted really for the 330X S but its a slight re-think. I will link in this youtube link we shows something we are after. What do you...
Hi, we are newbies to the UAV world! We are purchasing a Gaui 330 X S quadcopter with uprated legs with 3 axis camera mount for probably the GoPro Hero 2. I live in the Shepton Mallet in Somerset, and my colleague lives in Chobham in Surrey. Anyone of these areas would be fine for someone...