Recent content by Mudge

This is a Carbon Fiber and Aluminum Hexacopter by Alware. It is in almost new condition and has never been mistreated. I will separate it if you do not need everything. I am asking $2500 for the entire system. Here is list of parts. -Alware Streak 800 Hexacopter (Check it out on youtube)...

All wires coming from the motor are black. Is there a chance of switching the pos and neg wires and shorting the system?

I am having trouble getting the yaw axis to hold. When I am flying, and start yawing the multirotor, the gimbal gets confused and starts rotating without control input. I can duplicate this on the bench and I am having trouble dialing in the PID settings. Do I have to calibrate the third...

Are you willing to split it up? I am interested in the Naza+GPS

I just received the third axis. There are no instructions and I have a question. How does the thin, multi-colored wire attach? I see two ports on the expansion board and none on the "Black" Viacopter main board. Also, what is the max weight I can hang from this motor? The specs show 1500g...

I am trying to find a good setting for the NEX5 w/16mm lens, Alexmos board. I am having some hunting issues in the pitch axis. It might be vibration induced. Thanks!

I am loving this gimbal! Unfortunately, I am having some "hunting" issues while the gimbal is flying. On the bench everything is solid. When flying, the gimbal is searching in the pitch axis. I also have a receiver controlling the board in Pitch. Maybe this is a vibration or Power setting...

I saw the smoke come from the board but the sparks came the plug. With one battery plugged in, the Wookong beeps once every few second and has no lights. After the second battery gets plugged in the lights come on and the wookong works. It is side specific. One side, lights and wookong on...

Greetings, I have a 100 amp PDB with 2x22.2 4000mah batteries. I was connecting them via Deans plug to the MR and it began to spark. This was due to the Deans plug which I have replaced. After I plugged it in, the Wookong operated correctly and the lights came on. I then proceeded to plug...