Recent content by iut_iut

Here is a small video that i made with motor test by putting a tape on it. Tested M1...M6 in sequentially

no the GPS is on top of the font right leg (with M1 wings.) so its or front side. I checked multiple times and tested in different ways, The motor / propeller direction are correct. Motor 1,3,5 CCW and 2,4,6 in CW. front right is M1 and front left is M2 then M3,M4.. in CCW

I am using Hex rotor - V setup in my Naza. as per the Naza guide + all the manuals that i have ever read all of those shows for hex setup front right is 1 then front left is 2 and rest of them counter clockwise. also I have attached screenshot from the manual . Can you please tell me a bit...

Aslo attached the internal setup of my hex here

No Motor 1 is front right . AS of just now i checked the settings and gave another spin to make sure Odds are spinning CCW and even are CW.

I checked many youtube videos and manuals ..they all showed Odd motors CCW and even motor CW.. in Naza controller M1 is connected with Motor 1 , which is CCW

I have Triple checked motor & props direction even by putting a paper / tape on each of the motor. All Odd motors 1,3,5 are in CCW and even motors 2,4,6 are in CW

Hello, I am a newbie in RC multi rotor. Looking for help . I just finished building my first DJI F550 . after take off it keeps spinning and very unstable . I build it twice (after got damaged first time) and found same problem. After initial take off it keeps spinning . here is the youtube...