Recent content by heli001

  1. heli001

    OMG - It Worked......

    Hartz, For some in Austrailia...you can step Outside and be in the "Middle of NoWhere" for some others, their neighbor's house might be twenty five feet away......"BAD" Advice was probably not the correct term to use....Newer Pilots, in more populated areas, just need to be much more...
  2. heli001

    OMG - It Worked......

    Hoveringal, Just a reminder....It is NEVER a good idea to turn your transmitter off, to "test" the failsafe. If it is working in the Assistant it will work if the signal is lost. Sorry....BUT bad advice is BAD advice, espicially to newer Pilots.....!
  3. heli001

    NAZA M for larger hexacopter?

    It basically boils down to 400 versus 1,000....If you can see and feel the 600 dollar diference....buy the WKM. The short answer is....the NAZA seems to be able to handle larger Hex's, without too much difference in control. I have flown both, on S800's in pretty windy conditions and honestly...
  4. heli001

    Wookong Woes

    Models, I am sure that Geoff will look into it. I doubt that he is sitting there reading Forums today, after all it IS Sunday.....If you do not hear from him...go direct to DJI.....They DO want happy customers...I know that.....Doubt you have a Lemmon....it is probably something simple that has...
  5. heli001

    Aeroxcraft gopro gimbal HORRIBLE

    It is controller, motors, gimbal all in one package......
  6. heli001

    Aeroxcraft gopro gimbal HORRIBLE

    Looks like a good gimbal...but it is going to be hard for ANY belt/pulley system to compete with the brushless gimbal.....period...!
  7. heli001

    S800 crash at stadium - very lucky!

    That is the rumor that is floating around....the so called "Professional Pilot" was letting someone else fly it......But it is like everything else on here....just hearsay...I doubt any REAL details will ever come out.....It really doesn't make any difference WHO was flying it...They should...
  8. heli001

    Aeroxcraft gopro gimbal HORRIBLE

    The NAZA is a horrible gimbal controller...Period...Direct drive servos will always be herky...belts and pulleys help to eliminate that. You have received the best advice out there...bet a Gimbal Controller and if you can be patient....Kilby has mentioned the Brushless Gimbal that is about to be...
  9. heli001

    NAZA M for larger hexacopter?

    Kloner is right....You need to balance the props then eliminate any vibrations on the rest of the bird..........The NAZA should fly just about anything........we've had one with GPS on an S800 and NO problems at all. Hell...it flies just about as good as the WooKong......
  10. heli001

    S800 crash at stadium - very lucky!

    That's been all over RCG for weeks......Kid Pilot and don't think he had a clue.......WAY toooo dangerous and will probably have reprocussions..... for someone in Brazil.......
  11. heli001

    DJI Flamewheel 550 Crash - IOC Failure

    Do you have the IOC set up on a three position switch or a slider....? If you are using a three position switch, it would not normally engage the third position below 75%....Hope that made sense. You should be able to adjust all of the percentages for your switches on the DX 7
  12. heli001

    Wookong Woes

    Modles, If it was me....I would send DJI an email and tell them what you are doing....THEN, I would contact my Dealer by phone and fol;llow up with an email to them (Dealer). That way, DJI AND your Dealer are in the Loop and see what happens. If you are having any trouble with your Dealer...GO...
  13. heli001

    WKM / Ground Station Poll

    It is truly a shame that you bought it from a Dealer and he will not Support you, in getting it to Work. That's a pretty expensive add on, that is collecting dust, at present. I do all of my dealings with DJI here in the States, through the Austin, TX Office and they have been VERY responsive...
  14. heli001

    Wookong Woes

    Boris, Nice Flying Field....We irrigate year round also........
  15. heli001

    Any DJI Ground Station experts?

    I'm kind of curious about the ten minutes.....We use a Dell M6400 Workstation, which is kind of Power Hungry and we get about four hours on a battery......
Top