Search results

Hartz, For some in Austrailia...you can step Outside and be in the "Middle of NoWhere" for some others, their neighbor's house might be twenty five feet away......"BAD" Advice was probably not the correct term to use....Newer Pilots, in more populated areas, just need to be much more...

Hoveringal, Just a reminder....It is NEVER a good idea to turn your transmitter off, to "test" the failsafe. If it is working in the Assistant it will work if the signal is lost. Sorry....BUT bad advice is BAD advice, espicially to newer Pilots.....!

It basically boils down to 400 versus 1,000....If you can see and feel the 600 dollar diference....buy the WKM. The short answer is....the NAZA seems to be able to handle larger Hex's, without too much difference in control. I have flown both, on S800's in pretty windy conditions and honestly...

Models, I am sure that Geoff will look into it. I doubt that he is sitting there reading Forums today, after all it IS Sunday.....If you do not hear from him...go direct to DJI.....They DO want happy customers...I know that.....Doubt you have a Lemmon....it is probably something simple that has...

It is controller, motors, gimbal all in one package......

Looks like a good gimbal...but it is going to be hard for ANY belt/pulley system to compete with the brushless gimbal.....period...!

That is the rumor that is floating around....the so called "Professional Pilot" was letting someone else fly it......But it is like everything else on here....just hearsay...I doubt any REAL details will ever come out.....It really doesn't make any difference WHO was flying it...They should...

The NAZA is a horrible gimbal controller...Period...Direct drive servos will always be herky...belts and pulleys help to eliminate that. You have received the best advice out there...bet a Gimbal Controller and if you can be patient....Kilby has mentioned the Brushless Gimbal that is about to be...

Kloner is right....You need to balance the props then eliminate any vibrations on the rest of the bird..........The NAZA should fly just about anything........we've had one with GPS on an S800 and NO problems at all. Hell...it flies just about as good as the WooKong......

That's been all over RCG for weeks......Kid Pilot and don't think he had a clue.......WAY toooo dangerous and will probably have reprocussions..... for someone in Brazil.......

Do you have the IOC set up on a three position switch or a slider....? If you are using a three position switch, it would not normally engage the third position below 75%....Hope that made sense. You should be able to adjust all of the percentages for your switches on the DX 7

Modles, If it was me....I would send DJI an email and tell them what you are doing....THEN, I would contact my Dealer by phone and fol;llow up with an email to them (Dealer). That way, DJI AND your Dealer are in the Loop and see what happens. If you are having any trouble with your Dealer...GO...

It is truly a shame that you bought it from a Dealer and he will not Support you, in getting it to Work. That's a pretty expensive add on, that is collecting dust, at present. I do all of my dealings with DJI here in the States, through the Austin, TX Office and they have been VERY responsive...

Boris, Nice Flying Field....We irrigate year round also........

I'm kind of curious about the ten minutes.....We use a Dell M6400 Workstation, which is kind of Power Hungry and we get about four hours on a battery......

Hover, You might want to include whether it was purchased through a dealer or direct from DJI. In your case, which was it? In my experiences with them, they have been very helpful and we were able to work through any issues. What part of the World are you in and if you bought through a...

The ALEXMOS Controller is available here: http://www.csgshop.com/product.php?id_product=136

Momba, I'm missing something also. They Retracts) should not "Power Up" until the gear Switch or whatever switch you assigned to them is operated. My transmitter gives me an alarm and will not connect, if the gear switch is in the UP position and I can set that alarm on any channel I...

Juan (?), Sorry, I am not sure what you go by....... When we first tested the retracts, the right leg stuck in the UP position for one cycle, after about three operations, but after a that, it never stuck again. I am not sure that I understand the "wobbling" that you are talking about. It...

Heinz.....You do not miss an opportunity to PIMP your retracts...do you...? This thread is about Secraft.... Juan......Sang is very good about Customer Service...While it may take some time and the communications is ALWAYS a bit testy when dealing with Korea or China, please know that Secraft...