Recent content by Fxt4me

1 large factor in most of my bad crashes is showing of/ not taking a prudent amount of safety time.

TURN IT OFF!!!!!!!! look how high you can get before it kicks in and kills your lift. http://www.youtube.com/watch?v=dchJ9iLRzlM

I put OSD mini on F450 with naza V1 with PMU, LED and version 4.02, and it worked great! Have done a rebuild for cleaner wires and component placement and now I cant get video or OSD info to work. The green light on the IOSD Mini is blinking, manual states that is "data communicating" and on is...

OaxacaHeli, do you power all that and the F450 with just one battery?

I want to solder a JST plug onto a F450's frame where you solder the battery cable and the VU to power a simple 200mw 5.8ghz video Tx. Will this cause any problems powering all the devices off the flight battery pack (motors/esc's/Naza/RX/Video TX ect)? I use both 3s and 4s flight packs with the...

just pimp good job man!!!!!!!!

I have a stock F450 with very bad drift to the rear right side of the craft ( about 140 degrees on a compass). I have labeled motors A B C D with A on arm 1, B on arm 2 ect. I switched all 4 motor placement, front 2 changed with back 2 but keeping each motor on the same side IE: Arm 1 is now D...

Here are some pics of the many IMU calibrations(this is the most extreme) I have done over the last few days, both front and rear have been raised as much as 3.5" and I could not tell any difference in flight. The F450 always wants to fly backwards and somewhat to the right.

Sure probably not much to see but hopefully someone can help, its currently just a stock F450 and Naza, there are led light strips but they have not been used to diagnose this problem.

I may have a problem with my Naza imu could be software(as seen on my previos threads) I want to do a firmware update on top of current firmware IE: 2.02 over 2.02 just to be sure its working. After I do this in assistant 1.8 it tells me to cycle the controller ect but when I re power the Naza...

I switched motor 2 with motor 4s ESCs and that made no difference the F450 still fly's backwards. I wish someone did live near me so I could try a different Naza. I did a IMU recalibration with 6 xbox game cases under the rear arms IE: 3.5" raised and that made no difference, how much do you...

How close can you put your other electronics to the Naza. My F450 is currently dissembled before I rebuild im wonder if there are problems with placing Futba RX, the VU, 5.8ghz video TX or small video battery on the bottom plate around the Naza. I want to keep as much weight to the center and...

I live in Canada but order most things to shipping outlet in northwest Montana, uavproducts looks like a good place to shop I may be ordering things from them in the future. Sorry deanot you are right I did not acknowledge your suggestion but that will be the next thing to try I am about to move...

Thanks foe the help. I have now removed the Futaba rx and tx and put the DX6I and rx back on the F450 and the problem is the same. So now I know it must be the Naza or rear right ESC( I have noticed the when I shout the motors down the rear right prop always stops rotation first) so I think and...

Thanks for all the answers The CG is good, I also think ESC's could be the cause but I don't have any more to test and the Naza is held securely by the stock 3m pads. Kloner the rebind is a great idea, will do that today and if no difference I will go back to the DX6I just to rule out the Futaba...