Recent content by Fixy

Hi I have a phantom vision2+ that I've repaired after a crash. Had to replace the shell, 1 esc, motor and the shunt from the main board to the esc. What I'm getting is 4 red flashes on the esc of the arm that was damaged. The motors all seem to run fine but I want to fix the error before I try...

I gave up on the multi wii, put in a kk2 board and everything set up first try. Even got my dx8 to bind. Flies not bad but needs some tweaking.

Ok, getting more frustrated. Went to calibrate the esc's. The previous owner has cut the plugs off and extended the wires and one has 3 wires, the rest have two wires. I know this is the proper set up but sure makes it difficult to calibrate the esc's. I also am not able to identify the esc's...

No, not sure how. I also thought thats probably not the issue as it does run at different stick settings. I will read up on that and try. Thank you

Hi, trying to get my NX500 in the air. It has a multi Wii controller and 4 E flight motors and esc's. When throttling up only 3 motors try to lift. The 4th does not turn. If I apply full aileron or elevator to the side with the motor that is not turning the motor then turns and tries to lift...

Hey all, new to this site and multirotors. Looking forward to learning more. I have a nano QX in learning on while I'm setting up my NX500. Cheers! James