More and more problem toward WK issues since they launch the S800 it is become nightmare to Dji - currently flying two older version WK no issues here with the current 5:14 firmware
Shiu
My understanding is Apply to S800 owners only, :confused: but if there are any changes please keep us posted will follow- both of my OLD WK's flying with the HEXA version no problem so far …!
Shiu
Hi Dale,
Both of my WK hook to the RX R6208SB with the S-BUS version, and Micro S-BUS R6203SB hook to the NAZA they all placed in as you stated above. also attaching a picture with the TX 18MZ works like a charm…!
shiu
i have been flying with the Heli mode since own the WK eleven months ago…! no problem currently flying with the 18MZ Futaba ( Heli mode single servo)
Throttle mix with Pitch, i doubt that especially Futaba easily, it can be over rite the channel ( name anything you like)it 's all custom...
Hi Droider
I'm beginning to wonder ( what is it really wrong with the IMU or MC) I have a Two at this moment ,One was purchased during a introductory Time late August 2011 other one Early December 2011 , both are mounted on Hexa with current Firmware 5:12 Flying well with all the new...
Hi Lance
Yes ….. pretty straight forward about five holes need to be drill on the X650 plate in order to line up with the Dji Plate , to maximize the vibration free i added Grommets between Dji and X650 plates thru the plastic bolts very solid i hope it will work you…..! :)
Shiu
No Problem with my Both Hexa's
Foxtech Frame
Tmotors 800kv
APC 10x4.7
Pro Mktr Gimbal
3s 5000mah x2
AUW 3.1 Kg
8 flights completed x 10 minutes = 80 minutes No hiccups
Futaba 18MZ + R6208SB
********************
Dji 550
Tmotors 800kv
APC 10x 4.7
3s 5000mah
Aeroxcraft gimbal with Xaircraft...
Hi All,
i just updated Firmware from 5:06 to 5:12 no hiccups thru my old laptop window Xp version with the 32bit drive ( Two King Kong ) recently build Dji 550 Frame with the T motors 800kv ESC Flyfun 30a flew super smooth and Foxtech Hexa frame with T motors also 800kv and T Motors Esc All...