Search results

0ne thing is bothering me in the video too many white light flashes ( consistent) and it's a calm day, it's a sign of Terrible Shiu

More and more problem toward WK issues since they launch the S800 it is become nightmare to Dji - currently flying two older version WK no issues here with the current 5:14 firmware Shiu

My understanding is Apply to S800 owners only, :confused: but if there are any changes please keep us posted will follow- both of my OLD WK's flying with the HEXA version no problem so far …! Shiu

Hi Dale, Both of my WK hook to the RX R6208SB with the S-BUS version, and Micro S-BUS R6203SB hook to the NAZA they all placed in as you stated above. also attaching a picture with the TX 18MZ works like a charm…! shiu

i have them 9x5 and 10x5 Toronto brand new in the package Shiu

Very well explained …..+ 1 :applause: Shiu

Hi Dave, Thanks for sharing, i will keep eye on it….will post if it behave unwantedly :) Shiu

i have been flying with the Heli mode since own the WK eleven months ago…! no problem currently flying with the 18MZ Futaba ( Heli mode single servo) Throttle mix with Pitch, i doubt that especially Futaba easily, it can be over rite the channel ( name anything you like)it 's all custom...

did you try thru Heli mode? Shiu

Hi Droider I'm beginning to wonder ( what is it really wrong with the IMU or MC) I have a Two at this moment ,One was purchased during a introductory Time late August 2011 other one Early December 2011 , both are mounted on Hexa with current Firmware 5:12 Flying well with all the new...

Hi Lance Yes ….. pretty straight forward about five holes need to be drill on the X650 plate in order to line up with the Dji Plate , to maximize the vibration free i added Grommets between Dji and X650 plates thru the plastic bolts very solid i hope it will work you…..! :) Shiu

Hi, i did it without the drill some pictures are follow Shiu

In my case, it won't work because gimbal need to be mounted adding bolts nuts extra centre plate booms etc. personally i hate pinching wires Shiu

No Problem with my Both Hexa's Foxtech Frame Tmotors 800kv APC 10x4.7 Pro Mktr Gimbal 3s 5000mah x2 AUW 3.1 Kg 8 flights completed x 10 minutes = 80 minutes No hiccups Futaba 18MZ + R6208SB ******************** Dji 550 Tmotors 800kv APC 10x 4.7 3s 5000mah Aeroxcraft gimbal with Xaircraft...

Hi All, i just updated Firmware from 5:06 to 5:12 no hiccups thru my old laptop window Xp version with the 32bit drive ( Two King Kong ) recently build Dji 550 Frame with the T motors 800kv ESC Flyfun 30a flew super smooth and Foxtech Hexa frame with T motors also 800kv and T Motors Esc All...

Try this : default the Mounting Values and re-enter the values or change the value 1cm or 2 cm more or less double check them correctly entered with the positive and negative …! Shiu

Hi, i have a Two Wookings …! both are latest Firmware No problem here….Hexa 3kg max flight time 12 minutes back to back 24 minutes not hot at all ….!( luke warm) Tmotors 800 kv -props APC slow fly 10x4.7 motor to motor 695 mm, Power up with 3s 5000mah 30c x 2.. 650X aircraft quads ...

This member had a similar problem as yours sorted out at the End...! http://www.multirotorforums.com/showthread.php?3853-NAZA-erratic Shiu

Futaba 8FG Super ….! Easy to set up, over ride channels , S-bus compatiable minimum servo wires, Near Future ready to convert Octo version as well Shiu